Recent Content by uber ram

I would swap in an adjustable If I were you, It makes life easy, and you can set the boost that works best for you. I have mine set at 27PSI and that good for me! P. S. bust the screw loose from the loctite and have at it just dont go to far. Hav a great weekend folks!!

I got to change my oil !! Fleetguard/Rottella Somehow the Plate fairy left a #8 Plate on my seat;) so I got to change the the plate and add a adjustable boost elbow, "TST Kit" all went well 3 screws for the AFC the 4th is on the frame somewhere! one problem I ran into is when we moved the...

I do!! thanks forrest I try an ajustable boost elbow and see what happens. Mike

Dont forget the Smoke!! turning the star wheel all the way makes a lot of smoke, I turned mine back a few turns less smoke power still stayed up. got a replacement screw for the break off from a hardware store now its easy to play with the AFC and plate. Good luck. heres a question? with...

Man your Extreme!! I dont want to play with fire, I just wanna little more and a little more... . I slide the plate cranked AFC and added no boost, and It picked up real good!! I also got the KDP fixed, it was out about 1/3rd timinva a member of the DTR here in virginia beach did the work great...

3 screws seem to hold fine! Getting my KDP done tommrow, change the oil and if time permits slide the Plate. Everone have a great weekend. Mike

I might do that b4 oil change, did you replace the break off screw or leave it alone. Mike

Sweet!! I got to do an Oil change this weekend, if its not 100 degrees out I will try it. how long did it take you? Mike

Doug, Thats good!! did it give you a more seat of the pants feel as far as power goes? biggy238, Piers Diesel or TST carries the boost Elbow, Dont know how to make one couldnt be to hard. Mike

thanks Ya'll, WOT I hit 20Lbs solid, like you say that should do fine Doug, let me know how it doe's when you slide your plate foreward. I would like to do mine soon, Curious to see what happens. V/R Mike

thanks for the input, I don't trust myself to grind anything, what does griding it flat do? twist the trans into a dimension of no return:eek: if you move the stock plate forward do you need to turn up the boost? help me I'm lost in Diesel confusion! Thanks Y'all. Mike

Great! thank you, how much boost "if Any" do you think I should use with the stock plate all the way foreward and 3K GSK. and do I really need the 3K GSK?? Tks, Mike

Until I can afford a trans upgrade I would like to try moving my stock plate foreward and a 3k GSK "as recommended by Round Table members. . Thanks" will I need to Increase boost to make up for more fuel? if so How, Do i buy an boost control elbow or restrict the stock one. also can anyone tell...

Thank you Everyone, Ive heard of the georend Bros, And ATS and I think I will leave it up to a Pro to do the work, I just have to keep adding to the Trans Fund for a While, I saved up and sold off my old truck to buy this one "no Truck Payment" my wife didnt even mind me spending 15K on it...

Thanks!!:D I been trying to find out so I can start to upgrade it. not quit smart enough to figure it out yet Im still Learning. Mike