Recent Content by v1sc

Thanks for the reply, Cerberusiam. My thoughts are along the same line as yours but I think I needed to hear it from somebody else to calm me down. I am going to take it back to the shop on Monday and have them set the uppers correctly. Thank you for your help!

I just got the ball joints installed by a shop (along with U-joints and bearings) as I did not feel confident about getting the bearings off after New England winters have taken their toll on my truck. I ran into an issue. I got the 1/2 degree offset upper BJs that Cerberusiam had suggested to...

I just installed an Air Dog 150 and Isspro fuel pressure gauge at the same time. The gauge is reading 1. 5-2 psi of pressure and doesnt seem to drop at all at WOT. The needle also just sits in the same position when I bump the starter and wait for the pump to stop. I installed the 1/2 inch...

Does anyone have a part number for this wiring harness? I spliced mine about a year ago and the wires have done it again.

I bought a draw straw from Vulcan for my Air Dog install and I was thinking of taking the draw straw supplied from AD, cutting off the straw and using that fitting to make my own upgraded fuel vent. Does anybody see a problem with this setup? Would that fitting leak on the fuel tank?

AH, I am also using the Raybestos professional grade from RockAuto. They seem to be a great bang for the buck. I am going to look into lubricating the bearings and also the Timken bearings. If I can find them for cheap enough I might just go ahead and replace them. How does Spicer sound for...

Doing ball joints soon as mine are shot at 104K miles. What else should I do while I am in there? I was on the verge of buying a free spin hub kit but I don't think it will be cost effective for me. I work offshore half the year and don't put enough miles on my truck. How long are U-joints and...

My tires are 285/75x17 Toyo ATs. Same ones I see in your sig. I was hoping I wouldn't need a new PS pump but unfortunately you may be right.

It happens both when my foot is on and off the brakes.

Oh I forgot to mention that as well. There is no difference in the brakes. They feel just as firm as they always have.

I'm having a problem with my power steering. The only time the problem occurs is when I am sitting still I lose power steering. When I get close to full lock on either side it is completely gone. In the middle of the range there seems to still be a little power but it is still difficult to turn...