Recent Content by waltmoe

Thanks, everyone for the feedback, very much appreciated. I have been driving for 53 years and have heard countless horror stories from family and friends of HACK JOB transmission rebuilds. I just want my 48RE done right. I will take a gander at the Gorends option.

Greetings- I need my 2007 48RE rebuilt by a reputable Transmission specialist. I have been eyeballing Precision Transmission in Amarillo Texas, 1400 miles from my home. They seem to know what they are doing after watching their work on Youtube. The problem is their phone does not work and they...

Update: After completing the troubleshooting process as stated in the install manual there were no wiring issues noted. Since the pump had been leaking black oil I did replace the pump with a Gould pump with the larger pulley. The install is very straightforward, reconnected the vacuum line and...

Thanks everyone for the info... I examined the pump and noticed black oil everywhere.... I just ordered a new pump, it should be here in a few days.. Thanks again....

Thank you very much for the information.....

Greetings; my 07 3500, 48RE, 95,000 miles with dealer installed Mopar/Jacobs Brake was installed at time of truck purchase so it would be covered under vehicle warranty. The Jake brake has suddenly stopped working. The shifter mounted Jake switch is showing a lighted RED LED. When the Jake...

Thanks for the suggestions. I think going with new ones is the way to go. Appreciate the feedback. .

I change my VP44 injector pump but I cannot get the high pressure fuel lines at the cylinder head from leaking on cylinder number 1 & 3. I toque the fuel lines at the head per the manual to 28 FT/LBS or 330 IN/LBS. When truck is cold, I let the truck idle and I have no leaks until the truck has...

Does anyone know if the electronics in a VP44 send any signal to the lift pump to start up? This is a followup to an earlier posting on a V44 rebuild that was installed and now the FASS OEM lift pump does not work. The lift pump was working before the V44 install. Strange that the lift pump...

Did not solve the issue... This is beyond frustrating. .

Thank you..... Can a defective ASD relay prevent the lift pump from operating???

Is there a fuse that controls the ECM? If so does anyone know the fuse number and location? 2002 2500 5. 9 Automatic transmission. . Thanks

Thanks... . We did do that and we are getting some low voltage, we are going to double check it again. If there is confirmed low voltage do you have any idea what would suddenly cause this low voltage... Thanks for the help and response to this post.....

We turned the key to ignition then bumped the starter to start the pump.....

I just helped my friend install a very good quality VP44 rebuild in his 2002 2500 ram. We took our time and installed this pump by the numbers, all went well. When we attempted to start the process of bleeding the fuel lines the OEM FASS pump does not work, we just installed this new pump about...