Recent Content by whyte

no code thrown when put in gear and brake applied. however manual 1 does not slip upon rexamination.

upon re examining this approach lol you seem to be correct man1 will work. effects of running truck like this for awhile? sorry i was sure i had tried that numerous times i must have already had the slip happen cold as tits up here maybe my diagnostics were slacking

i am unsure if the code will set at stop in drive gear after clearing code. its bizarre how it will upon clearing and especially while cold the truck will take off a short distance. *i can check after work. i appreciate your timely input cheers

2-6 and even 1st work if as long as speed is above say 15km/hr it will not electronically shift to 2nd until moving at about that speed after clearin i get p0731 and p0933 the 3rd code dissapeared. * when out in park it engages normal. but of a pull and audible switch into gear then when brake...

r is normal

no joy. man1 still slip

ok. by manually selecting gear 1 (electronically i should say) the trans still slips*

and would the transmission not have a different code for the clutch?

i did consider ORC as cuprit but the fact that it operates normal in 4low threw me off. explanation?

here are the codes

no movement forward from stop 2011 ram 3500 6.7L engages 1st gear(audible feelable) then slips out after 10' (loss of forward movement..no sound or jerk)when cold and almost instantly when brake removed warmed up. was stuck in snow. bully dog chip(used for delete) shows p2706 p0731 p0933. 4x4...

2011 ram 3500 6.7L engages 1st gear(audible feelable) then slips out after 10' (loss of forward movement..no sound or jerk)when cold and almost instantly when brake removed warmed up. was stuck in snow. bully dog chip(used for delete) shows p2706 p0731 p0933. 4x4 low drive works in both...