Search Results for Query: *

could it be that the rod going to clutch pedal needs to longer for slightly more travel?

I was at the store ealier and when I started the truck and went to put it in reverse it would not go I had just put in a slave cylinder about a month ago. if i go to put it in 1st or 2nd the truck will jump a little. About 6 months ago I put a new valair clutch in. A friend of mine said it good...

Alright I will go back with the stock slave then if it dont really matter thanks

Is it a good idea to have the upgraded slave with a con Fe and if so where can I order one from south bend just has the part numbers for it no price or anything? Thanks

I checked the fuse today and the 15amp parklight fuse was melted down to nothing and the light would not work at all so I managed to pull it with needlenose and discovered that the fuse panel was also melted a little, but i dont know where to start on finding a short.

Is there anything I can buy to put a high idle in my truck because I always leave it running when I go into stores its usually no longer than 5 or 10 minutes but i want one? Thanks

yeah I dont have a clue it will be a chore to get it to fit

well i will check the fuse socket seems like a good place considering I ran one of wires from my gauges down there but cant remember which one thank you

there is really to much to explain but to hook up the gauges its pretty much cut in dry the directions should tell up that but the light hookup all you have to is take a test light and find a wire that works of your headlight switch its easy once you remove the switch but make sure the light is...

I was driving down the road the other night and my gauge lights went off i still had headlites. then tonight i was pulling my trailer and the same thing happened but i just had clearance lights on and lights was not working on the trailer. after about 30 secs they came back on again. What im...

mine did the the same thing a while back and I changed the sensor out and it has not done it sense. I think its around 60 bucks at cummins for mine but you have a different sensor but it should be about the same

Thats what I was wanting one for was to split gears while pulling, but what I might do is just get a bigger turbo and that will help a little bit

I would like to just buy nozzles if I can. But what I dont know is will I get a 150hp out of them if I rebuild my supermentals with 150hp nozzles or do I need to buy the injector to do what I want to do and get a little better mileage at the same time?

How big of a differance is between just the nozzles and the whole injector setup, i got the supermental injectors right now that i want to rebuild and make them 150hp but I dont know how much I will gain and if it will help my mileage any because the supermentals dont do so well with mileage but...

Overdrive Unit, Is anybody running them? And how much does it help mileage empty and pulling? I have a Doug Nash one right now that i have picked up but US gear bought them out and quit making parts for them I think

'03 doesnt want to start sometimes when warmed up 5-7 sec cranking before it starts and it blows a little blck smoke at idle. (stock everything)

Im pretty sure your timming is to advance put a smarty on because it has power levels with no added timing and see what that does. Do you know anybody with one that will let you try it out?

The '03-06 you can but 07 6. 7L you cannot you have to put the ultra low sulfer in them

how high are they getting?

Where are you running your drag comp? put it on 1x1 and see where your boost falls if its around the same then I think paul is right also.