Search Results for Query: *

Thanks for the reply. I do have a isolator on it. Got the kit from genos andy

Any one noise is driving me crazy ?????

Just relocated mine on rail 15psi at idle under load up a mountain running 70 mph 12psi I hope this will work andy

Questions my isspro fuel gauge is make noise under a load. Can someone tell me how to fix this or does always happen. Does this mean i have air in the line? Thanks for any help. :confused:

Thank you guys for all the input. I was hoping that maybe i still had air in the line with the new gauge. I guess it would be wise to check with a mech gauge right from the vp44 to make sure it is a lp. Just to let you you know i took the schrader valve out because the line that i got from genos...

thank you joe . Its funny how this works the truck runs great. andy

Questions maybe someone can help???? got gauge hooked up at idle it reads 15psi then drops to 5 . then when i drive no load or hill running around 70 mph it goes up and down from 15 to 5 then back to 15 will stay there for a few mins then go bavk to 5 on and on. Whats up with this... andy...

Thank you for the reply. i got everything hooked up and bled the air out when i start the truck gauge goes to 15 stays for a min then drops to 5 whats wrong now need help..... andy

All you guys with 02 ctd, Have you had problems with genos fuel line that they give you that screws into the vp44???? the problem is that it will not push the scharder valve in and smash the plastic part on the inside of the line . . Andy at genos was a big help on this he said to unscrew the...

Can some one help me i got my kit from genos. hooked up tonight and cycled key no fuel???????????????? It say to hand tighten line to vp44 and turn 3/4. I have no fuel to isolator???? iam i doing something wrong. Is the scharder valve not opening IAM STUCK. also genos says no teflon tape on...

Do you need to bleed the isolator out with coolant???? Will it mix with the fuel and go back down to the pump?? I seen a thread that someone thought it might have made there vp44 go bad . getting ready to hook my fuel gauge up. Any help would be great. andy or any helpful tid bits :)

Question it says to fill and bleed air out with coolant. Would that be antifreeze. 2. Is all this bleeding process needed? Or can you hook it all up and just cycle the key a few times thank you for help on my fuel gauge install and any other helpful hints would be great. i bought the kit from...

Got my fuel gauge kit from genos today and have some questions and need help please . lahf line when you hook to vp44 due you cycle switch to see if there are leaks with out the other end hooked up. Or due you hook to the isolator then due the bleeding process. also it says to fill isolator with...

Where is the best deal to buy one. And does it hook up like my ez. already have gauges. does it use the pyro or reads off the computer for egt. thanks andy

Does any one know the edge part # with screen for the 02 ctd andy

I Have 80,000 On My 02 24v Is It Time For A Adjustment On The Valves. I Heard That You Do Not Do It Untill 100,000? And Is That Something The Dealer Can Do??? Thanks Andy

Is it poss to mount a mechanical fuel gauge on the out side of truck up near the wiper cowl. i had one on my mustang. it was a outside gauge????? thanks

what is the best adjustment #s on my 02 ctd ho intake and exhaust. I know everyone has diffrent numbers . Just looking for best performance . Has 80,000 on it with ez and exhaust thanks andy

Question my 02 ctd has 80000 on it. Last week i noticed a noise. only can here it in cab open the hood can not here it. Sounds like a valve noise does not do it under a load only at idle or when you are off the gas pedal. never have remebered this noise before. do my valves need adjusted. You...

Antrim Thats cool i remember now its been a while. do guys meet at all in the area with the trucks. would like to get a set of injectors for mine. Something to match my turbo and ez. I guess the guys at antrim can help andy