Search Results for Query: *

Thanks guys for the info I'll give those options a try.

have a problem with my truck making a noise when I make a right turn only. I think its in the suspension because I can get it to make it when it's standing still by rocking the truck back and forth. I don't know how else to describe the sound but to say that it sounds like "erk erk erk". It...

mundgyver check the bottom latch on the quad door. my drivers door doesn't close real tight either and I found that the latch on the quad door was loose and causing the main door to be loose. Haven't fixed mine yet but i'll get to it one of these days.

Has anyone had a problem with the door latch on the bottom of the quad door. Mine is real loose and is causing the main door to not close tight. the screws that hold the latch on are very tight but the latch its self is real loose. it seems like maybe there should be a shim or something to keep...

Thanks for the input guys. I did check out the joey and truck vault systems. guess i'll have to decide what to do now.

Thinking about buying a system to put in the bed of the truck that will allow me to unload all my construction tools with out getting up in the truck. Basically its a 4x8 platform that slides on rollers and you can slide the whole load out the back of the truck. It will extend a full 8ft out the...

I've noticed a lot of road noise lately and discovered that the latch on the bottom of the drivers side quad door is loose. I can't get the screws any tighter. They seem to tighten up real tight but the latch is still real loose. Pulled the door panel off but can't see a way to get to the inside...

I had the same symptoms on my truck for the first 50,000 miles. Had it to dealer many times but couldn't find anything wrong. After it was out of warrenty I continued to try to find the problem on my own. Finally replaced the steering box and also the intermediate steering shaft going to the...

Just got my 99 back from dealer. It also had clunk in steering. I could feel mine when going straight but it was worse when turning. Diagnosis was a bad intermidiate shaft going to steering box and also a worn tie rod end. Replaced both and solved the problem. Good luck.

Pressure switch is the most common thing to go. It should be a 3x3 box with a lever to switch the compressor off and on. A new one will cost about $30 or so. If the compressor shuts off and you don't hear it release air it's ether switch or a bad or clogged check valve in the line coming out of...

MHindaman I got my truck back from the dealer today and it was the intermediate shaft. The shaft between steering wheel and the box. You were right Extreme1. So now I have a new steering box and a new shaft. I think the first machanic that said it was the box was wrong and now I've got a spare...

Thanks for the reply extreme1. When I'm going over rough ground or gravel it feels like the whole steering system is seperated from the steering wheel. It's pretty loose. The shaft out of the box only has play in it when the steering wheel is turned I can't really take the shaft by hand and...

About a month ago I had my steering box replaced by a local shop I always deal with. Now I still feel and hear a clunking in the front end. can really feel the play in the steering wheel when going over bumpy road or gravel. Had 2 machanics check the front end and they both say that everything...

15-40 rottela t . I have been taking my truck to a quaker state fast lube place for years and have had good luck with them. Have gotten to know the guys and they seem to know what they're doing. My question, is the quaker state oil filter they put on any good? who makes the filter? Thanks, Don

Thanks Steve and Joe for the info. I forgot to mention that I took those alignment specs with me and gave them to the mechanic. I think he used them but I didnt get a read out printed because his printer didn't work. All I care is that it goes down the road straight. Thanks again.

I have been reading on this site for months and finally subscribed. Have learned so much. My truck has 53000 miles and I have had it aligned many times but it never handled right. Finally got fed up and took it to another machanic. Now it feels like I have a new truck. It has never handled...