Search Results for Query: *

I've got a adjustable boost elbow and a boost fooler on the way. After I install those and replace the 2 banjo washers at the back of the head cause they are starting to suck air, I will adjust my valves as they are long overdue anyways and see if my super weird exhaust sound goes away and I'm...

It reads like 14.35 at idle so that would make sense. I cant recall clearly but I think before the computer had ot be rebuilt it wouldnt read 14 at idle it read like .5 or something like that and then ready up to 26 and would throw the boost code. Thanks for the help! Okay so that solves that...

I have a Truck 911 thread about new injectors and exhaust noise now but I have another question that isn't as serious. Okay so I installed an Airdog II and a new VP44. Ended up needing to get the computer rebuilt as well as my throttle sensor circuit was friend somehow. So I had it sent off to...

I have a brand new Airdog II and brand new VP44. Less than 1000 miles now but is going up everyday. So I know it has good fuel pressure and the pump is strong. I decided after driving it for a while I would drop some bigger sticks in it. So I bought the DFI 7x.009 injectors stated above and also...

I bought some DFI 7x.009 sac injectors and new cummins connector tubes. Install went smooth or so I thought. Truck took about 2 minutes in total to start while bleeding lines and everything. It ran had rough idle because of air. Then it went away but a small rough idle stayed. I can feel the...

Okay so my dads pastor has a 2001 6 speed 4x4 dually and he let me borrow his computer. I put it in my truck to test and thentrick fired right up. It stuttered st first and then I gave it throttle and it REVVED UP. The truck honestly sounded a little different when I revved it but then I let off...

Is there a write up of how to do this somewhere? I'll try anything at this point to keep me from paying $85 an hour haha

Im off work today so I will check that today wen I go to the shop. I'm changing the oil in it later today because if I can't figure out what's wrong with it then I will be taking it to baileys diesel and don't want to them telling me my oil is bad and trying to give me the runaround instead of...

I have looked at the blue chip website and have actually been trading emails back and forth with the owner I believe. He seemed confused as to what was going on aswell after I explained everything I have done and checked already.

So my crank sensor should be okay as my tach still works and I have no check engine light

The truck starts like it used to and the tach works fine but to kinda add to this is that the first "new pump" I had would take 20-30 seconds to start the truck no matter what and then this new pump I was sent the truck starts in 2-3 seconds which is great. But yes the tachometer works.

I hooked a scanner to it and the throttle is at 0% and while slowly pressing the accelerator it begins to rise with no Hesitation in % all the way to 100% and back down to 0% with no stutter

I hooked up a scanner and read the live data but nothing looks odd to my knowledge and it had no history codes or present check engine codes. I will hook the scanner up again and see what I can find

It is a freshly rebuilt pump as thoroughbred claims. And I will check the crank sensor in a bit. It has a new car sensor already so I think that's okay

I will check it in a bit and I will look into buying one.

My truck is a 5 speed but thanks for trying to help

I might also add that I have a brand new TPS/APPS and I have done the reset procedure 5 times now in hopes to fix it. I also have a new Airdog II 100GPH lift pump at the same time as putting the new injection pump on. There is no check engine light. The scanner shows no history of check engine...

Im back again with the same problem. I sent off the old injection pump to be tested by thoroughbred diesel and the results came back okay. They sent me a completely different pump back after a few emails back and forth. I check to see if it was different and it was. I put it on and the truck...

I read the whole BlueChip page about the VP44 and i found no answers to my problem. I killed my batteries working on it trying to search and find stuff online to test. Im not very good at using a volt meter as i am horrible with electricity stuff. The TPS/APPS seems to be working fine at the...

Sorry I have been on my computer and was readin all the suggestions but wasn't logged in to respond