Search Results for Query: *

I have intermittent resistance in my clutch pedal. 7 years ago I installed a new valair clutch and an HD master slave. About a year to a year and a half ago I had the G56 rebuilt and a new southbend installed. Recently I've been getting some intermittent resistance in the pedal and not sure...

All went well with the axles. My trailer has two new 6000# axles and hubs. Camping world received the axles on a Thursday, I dropped my 5th wheel off Friday afternoon and was ready for pick up Tuesday early afternoon. Real satisfied with everyone involved. I hope this thread will help someone in...

Haven't gotten around around to it. I need to dedicate a few hours to it since the truck will be inoperable. I just can't find the time right now. Hopefully will soon

Mpaulson, I do have one dexter hub, seem to fit good and has been fine but relieved now knowing axles are getting replaced. My problem now is trying to limp it over to camping world with the bad bearings on the one axle

Nick that's awesome, I called forest river they put me on a conference call with lippert. Lippert agreed to replacing axles with no charge to me, they will send new axles and hubs to camping world and forest river will take care of brakes and labor. Still I find it funny that forest river...

Thank you for the replies. I just re read my post and auto correct on my phone didn't help me much but it looks like you were able to read through the mistakes. I am going to research in a rv forums site as well as try to locate a bearing distributor here locally. I did replace 1 hub and...

Has anybody had issues replacing bearing on a lippert trailer axle? I have (2) 6000 lbs axles under my 5th wheel And have a wheel bearing going out. The use nevrlub bearing/hub combo. I've searched for just bearings so I dont have to buy the whole hub which retails for 350.00 and can not find...

I sure appreciate all your help. I was under my truck sizing things up this afternoon. I think I could weld a plate 90 off the frame bracket and bolt the pump mount to that. It would be in the yours was. Thanks again, like I said in my earlier post, I fear ripping the pump off 4 wheelin

I'm thinking it's powder coated. When I get a chance I'll take a look at it

Did you weld a plate 90° off the original AD plate and bolt the mounting bracket to that? Then put 90° fittings for the fuel lines?

Thats not a bad idea right there between the fuel tank and t-case. Im wondering if having a transfer case skid plate would effect bolting it up there. I'll have to crawl under and take some measurements. Thanks again

Thanks for the reply, and post those pictures when you find them and let me know what you had to do to modify that back plate.

Is that a common thing in the 07 5.9? The same light went out in mine maybe 2 years ago, I figured I would wait until at least 1 more went before replacing them. vr1967 thanks for posting the part #.

I understand where you mounted it, yeah I have a short bed. I'll have to do someasuring to see if I can make that fit.

Problem solved, first junk yard I we nt to this morning had one under a pile of car parts. Even had the cross support attached. 40 dollars later it's in the bed of my pickup. I'll look into a more heavy duty fabricated plate later. I did notice a fuel tank skid plate there also I should have...

Thanks for the reply big nasty, so that I understand correctly, you mounted it inside the bed? And can you attach a picture

When I originally installed my airdog the only place I could find to mount on a short bed was right below the drivers door on the frame rail. It hangs down below the frame and rocker pannels. This would not be a problem for a highway only truck but since I've installed a carli lift and go off...

I need information on t-case skid plates. oem vs. hd after market, and is there an after market manufacturer for the skid plates? I do not currently have a skid plate so, if there isn't an after market, then oem would be fine. But where is the best place to find one for a reasonable price?

Thank you, I appreciate that. I notice they have after market control arm which I'm in the market for

Does anyone have knowledge of any bumper companys that sell prefab bumpers that ship pre cut just needing to be welded?