Search Results for Query: *

@JeffS07 any luck? I was wondering if a later years foam might fit our?

In my opinion you would probably be fine dumping under the truck. Compared to mine a friend who has straight pipe (kept cat no muffler) his truck is louder outside the truck, about the same from the cab. But if you have a good exhaust guy he could probably get creative and make it work.

Cutout Race Ready Performance. Owned by Steve Garske, excelent work, great product, wonderfull customer service. Not as loud as a muffler delete but the tone is just as good and no drone. Best of all, just like rolling up your window at drive through or when ever. I purchased the...

Correct me if Im wrong but don't the new tow mirrors have a larger wide angle portion? Mine is only in the upper outer corner where as the new ones extend down the entire outside of the mirror (across the bottom if flipped out). Would one be able to simply swap the glass and as a result get an...

Poe I think your correct, the 5. 1 is glycol based so it is hydroscopic like the DOT 3 & 4 stuff but has the heat capacities of the DOT 5 Silicone based stuff. I know my brother runs the 5. 1 in his Vette for the clutch since the resivoir is in the bell housing and get stupid hot. He has...

Title kinda says it all, I am looking for a series of articles from the Technical Topics section of issues 45, 47, and 48. From the TDR Index: Fueling box power enhancements Issue 45 (Technical Topics) Doug Leno and Joe Donnelly explain the fueling box for the 2003-04 engine, the relation...

Dodge to supply 5 uM So to bring the thread back on topic ... . The TSB says that Several parts will be added to this bulletin when they are available... These parts include a 5 micron fuel filter for 5. 9 engines. So for normal duty is there any benefit with an aftermarket system when...

I found 60 psi in the rear was too much. The center tread was wearing faster than the front wheels. Running 65 psi front and 50-55 psi rear.

I got the wiring harness in and their switch and the Dodge switch are pretty much identical except for one minor thing. in the RRP wiring harness right before the switch they have a capacitor (see orange dot in wiring diagram below) and before you say anything yes I realize that the little...

For an 07 the Service Manual says 50 Psi. Above that and the system is low. Below that and the system is pretty much empty.

Yes, that is a LED, I was talking about the capacitor. It is soldered into the wiring, and they split off of it to supply both the LED and the motor. I realize it is not the correct symbol but I indicated it by the orange circle. I could maybe understand the need to condition/smooth the supply...

Hey B. G. thanks for the reply. I got the wiring harness in and their switch and the Dodge switch are pretty much identical except for one minor thing. in the RRP wiring harness right before the switch they have a capacitor (see wiring diagram below). Any ideas on why they would have it?

Be carefull with the do it yourself kits. Most of the bottles with the little gauge on them contain leak sealant. This can stop things up, make sure you get just the refridgerant. I had to ask for it, as the local parts place here has it in the back. They have the leak stop stuff out on the floor.

Yeah, my problem is that I don't have the cutout yet so I can't see how they have it wired.

I am installing an electrically actuated exhaust cutout from Race Ready Performance (4”). Since my truck does not have the power adjustable pedals I have a very nice spot currently with a blanking plate for a potential switch install location. I would like to use the dodge power adjust pedal...

I am installing an electrically actuated exhaust cutout from Race Ready Performance (4”). Since my truck does not have the power adjustable pedals I have a very nice spot currently with a blanking plate for a potential switch install location. I would like to use the dodge power adjust pedal...

What pressures do you currently have them at?

A/C Heater Control Calibration For those of you who mentioned the HVAC Calibration The A/C Heater Control calibrates each actuator individually. Automatic calibration occurs upon power up after installing a new A/C Heater Control. Manual calibration occurs by sending a command with the...

From the Service Manual (for an 07 ... no idea if it differs for earlier) CUSTOMER LEARN METHOD NOTE: The Customer Learn feature is only available on domestic vehicles, or those vehicles which have a U. S. country code designator. This programming method also requires access to at least two...

From the Dodge Service Manual: "The heating-A/C system pulls outside (ambient) air through the fresh air intake (4) located at the cowl panel at the base of the windshield and into the air inlet housing above the heating, ventilation and air conditioning (HVAC) housing and passes through the...