Search Results for Query: *

Ya, I didn't think it was so much of an attack. I included the S&B part in initial post because it was what led me to see the puddle. My post describes the sequence fairly clear, but I guess not clear enough. I started working in a Chrysler/Dodge/Plymouth/Jeep dealership in 1976. Spent 27 years...

Thanks, sag2, I will do that, would've went with a dry element, but they were on backorder, and my filter housing was damaged, so it was lesser of 2 evils. will probly switch over to a dry element when they become available.

Oh, and yes, it is a crappy picture. Not sure how many I took, kept getting glare or flash?? every time. Sorry about that

Sorry for the delay, was unavoidable. To answer questions, guess I wasn't clear in first post, the puddle was there when I installed the S&B kit, had wiped it clean at that time. Yes, it is an oiled element. When I serviced truck, 4000, miles later, puddle/stain had returned, pretty similar to...

Hi, I took the plunge last fall and purchased a used 2020 Laramie 3500DRW truck. Finally parted with my 2005 Dually. I installed an S & B air inlet system on shortly after purchase, noticed a very small amount of oil right in front of turbo inlet, not really a puddle, but more than a stain. I...

Have seen 1 at dealership in town.

I recently upgraded my 2005 3500 DRW with a 2020 3500 DRW. Its a nice Laramie loaded truck. The Grid heater thing worries me, as someone else said about bad luck... So being the cheapskate that I am, I chose the B and D kit over the Banks unit. I pretty much do all my own work, even tho my age...

My 05 had plastic tanks, swapped in an aluminum Banks unit before I had an issue. Its still hanging on the wall waiting for me to get tired of looking at it...

Yup, I just need to get truck away from him for a bit. Thanks!

Lordsman. after reading my intial post, I see why you thought valve was still there. Sorry. my bad. EGR valve is gone, but air control valve is still there, just unplugged.

EGR is not there, but air control valve is, just unplugged. Was wondering if this could contribute to poor performance? Have not had it apart, so not sure of its operation characteristics.

Thanks, I will look into the MAP sensor. I did stop out at the ranch a little bit ago, just to give it a visual. Started it up and it ran fine at idle, but I noticed when I stepped on accelerator pedal nothing happened. after 5 or six times of working pedal, it then would rev up. I didn't have...

Fuel and air were just changed again. I will try and get truck this week so I can drive it with scan tool hooked up. That should show something..

Thanks, Ozzy and BigPapa, that is what I was wondering about. My '05 ran fine when I forgot to turn my FASS pump on one day, and I was surprised how well it ran. In regards to the other "issue" here, I have read posts, on this site, where the person says" I have a truck, or bought a truck that...

No, was thinking tank lift pump. but lets just drop whole thing.

Hey Guys, a buddy of mine has a 2012 3500 C & C with 6.7 and Aisin transmission. about a month ago, the 2 of us deleted it. Did EGR and SCR and Catalyst removal. Truck has a bale loader and pellet feeder on it, so its heavy. Truck will be used on his ranch for feeding cows and moving hay bales out of...

A few years back, I talked to a fellow named Lou Mancinni. Some of you may recognize the name. He was the Chrysler person in charge of inspecting warranty return transmissions back when 47 and 48 transmission's were out. He informed me that the single biggest issue he observed in those returned ones...

Well, he drove it for a few days, roughly 100 miles, the CEL came on. next nite he called and said the message center was showing the DEF system needed dealer service in 193 miles. Pulled P207F and P20EE codes. He had not added any Def fluid to it since I looked at it last. I did look at the...

Thanks for all the info, I will get truck back and check the tips out. Was wondering if bad Def fluid could be part of problem, as truck had been sitting a while before I picked it up. I'll have to go out and look at my notes for the codes that were showing. The tip about sensor temperature...

Hi all, picked up a 2012 3500 cab and chassis for a buddies Hydra-Bed. Def equipped, 4x4, auto, 161,000 miles on it. Had a code for invalid communication coming from front NOx sensor when bought. It appeared that someone had already replaced the sensor assembly, no names or part numbers on it...