Search Results for Query: *

Not sure about your 02, but my 01 5 speed had this done from the time I bought it. Never even realized until one day I was working under the dash and saw a plug with the wires connected together. My cruise worked fine, everything did, except you could start the truck with the clutch engaged and...

It's good that you have a shop that you have confidence in. However, I would still be cautious as they are telling you they can get you a part that is no longer made. Something just doesn't sound right to me with that. Possibly they have confused a vp44 ecm with an early common rail ecm? I don't...

Uhm the only thing the ecm does is control the engine....that's why it's called the engine control module...maybe your thinking of the pcm? Located on the passenger side of the firewall.... I do agree that an actual brand new oem ecm for a vp44 truck would be worth quite a bit...idk if I'd be...

I have never had issues getting a shop to install parts I purchased...I would look into it before ruling the idea out if the shop is unwilling/unable to get one at a cost you are willing to pay...I would also be a little careful dealing with this particular shop since they are under the...

Just keep in mind with the coil spring rear suspension on the 2500, you have a lot of extra wear items that will need to be replaced eventually. Control arms with bushings, track bar, etc. not sure if it's been discussed or not, but I wouldn't want one.

My father and I changed the rear main seal on my 01 when we had the trans out. The screw method for removing the old seal didn't work for us. That seal is in there good!! We just kept ripping the screws out without it moving at all. I would expect and plan for having to remove the adapter plate...

Still available?

There are a few other options out there. S&B makes a very nice enclosed intake that you can get with a dry filter. Then I believe AFE makes a good dry filter. It's been a while since I researched this, but as I recall, none of those aftermarket filters have as good of ratings as the OEM. I don't...

I'll have to dig through reciepts if you want the part number, but it's the Donaldson one. To each his own of course. As I said this is just my opinion based on all the research I did when I was trying to find a solution to the K&N that was on my truck when I bought. Saying that every post you...

You guys are way over thinking this. It is a very simple, very easy repair. Watch Goulds video on YouTube, pickup a Cummins gasket set off eBay for $20 or less and reseal your pump. I'm not sure how the dogs could get so sharp as to be able to easily cut that seal, but I can tell you I've had...

A BHAF IS the answer to your problem. You may not think you need more air, but how about better filtration? The stock filter boxes are known to leak dirt in at the corners as they age/crack. Btw my truck pulled the filter minder down just with bigger injectors and 30+ psi of boost. So the engine...

Did you ever get the heated mirrors figured out?My heated mirrors don't work either, but I can hear my relay click when I press the button. What is the light you guys are talking about that comes on?

If you can afford to keep them all then why not?? I would love to have an old 12v....

Thanks for the input guys. Guess I'm gona hold off for now then. I may just make one. I was looking closer at the pics of how these fit on a 2ng gen and I'm not sure I like it after all.

Thanks for the reply! I am putting it on my 01, just figured it might be better in the 4th gen section since that's the bumper I'm looking for. I think I'll hold off for now, because I'd really like to find one with fog light holes. I want to be able to add them in the future. Thanks again for...

Thanks for the reply! I know Geno's sells a replacement, but I'm too cheap to pay that much lol I was hoping maybe someone had a seat in bad shape that I could get a passenger cushion out of or something lol

Looking for a driver seat cushion in good shape and the fabric if it's not torn also looking for the bracket that holds the dipstick tube to the rear of the head alao looking for the bracket that hold the hydroboost lines near the booster also looking for the passenger inside door handle thanks!

If you still have these would you consider selling them separately?

Looking for a stock bumper. I would like a black one with fog light holes, but may consider black without fog light holes or chrome with fog light holes if price is right. If you have one and are near berks county pa or Jefferson county ny we can meet up and save shipping cost/hassle. Thanks

Hi everyone, I'm posting this because I'd like to get an idea of how many guys are running this stuff in there NV4500's, how long they've been running it, and how it's working out. I know that M1973M has done a good bit or research and is liking it so far, but I'd just like to see if there's...