Search Results for Query: *

How hard is it to replace the turbo speed sensor?

Towing 5th wheel to campground. Lost power and CEL came on. Code p0106 map sensor. Got to campground and checked for vacuum leaks. Checked the intercooler connections and there were no holes or splits in hoses. Pulled map sensor and it had a good bit of build up. Sprayed MAF cleaner on it...

How much are the modules?

I started it with remote this morning and it shut off again after a couple minutes.Cleared code this morning when I got to work. Started with remote a couple minutes before I left and it kept running. So far no codes. It was a stored code. Read temporary and not turning on CEL.

Hello all. A few times I would start truck with remote start. Went out to leave 10 minutes later and truck shut down. I got an EVIC message about restarting to reset remote start(not exact wording). No CEL, everything works and truck runs great. I decided to check with Alfaobd and the only code...

I was worried about the different tire sizes messing up the rear. I would only use the spare until I could get tire repaired or replaced. Thanks Ipennock for the explanation of the Torsen style Limited slip.

I looked on the door post to see what tires came on truck and it was the 20". I'm going to look again to see if it has spare listed. 20" to 18" seems like a big jump but I never thought of tire sizes. I just wanted to be sure I wasn't gonna mess things up on the drive train. This just saved me...

Thanks. I wasn't sure and I didn't want to fudge up anything on the truck.

275/70R18 spare 285/60R20 tires on truck

Hi everyone. I bought my RAM used back in Nov. It has 20" rims. No biggie. I crawled underneath to change out water separator/fuel filter and noticed I it has an 18" spare. Would I be able to use spare as long as I don't put it in 4x4 and turn off traction control? I'm looking at possibly buying...

Where and how do you connect a lock out switch. I have been looking online and I can find a trans controller for $400 to $600. If I can find a cheaper fix, let me know.

I had them check the injector return flow and lift pump pressure. lift pump pressure is good and the return flow. they told me it flares on decel and shutdown. it has 175ccm @ idle, 500ccm under load, and flares to 300ccm. Can anyone tell me what this means? They said the injectors will need to...

I found my old fan clutch and installed it. Codes went away. The only reason I replaced it is because it took awhile to warm up in the winter and it spins faster then the dorman. Of course the dorman didn't work either.

Just for ****s and giggles, I checked my DTC's with the Smarty Jr. I didn't have a CEL. It had codes 480 and 483. I know they are for the coolant fan. I just put a dorman viscous fan on about 8 months ago. Could this fan clutch be bad already?? I've been having temp problems(running hotter than...

Finally back on line again...thanks for all of the info. I had a K&N c/a/t on it. I took it off because I heard an open air intake sucks in the hot engine air(makes sense). I put the Banks intercooler and new plumbing on it and it seems like the turbo side tube is a bit larger than stock and...

Hello out there...Looking at the DPP cooling intake hose. It takes the place of the hose from the stock air cleaner box to the turbo. The hose is a direct fit and eliminates the baffle setup in the stock hose. I'm also gonna install a PSM cold air intake. It connects to the stock air box. Any...

I bought and installed a dorman fan clutch. Replaced it within a year with another dorman due to the shaft getting wobbly. Under warranty but... It was half the cost as OEM but it won't spin as fast as an OEM fan. You get what you pay for...

I have a K&N air intake on my truck right now. I'm lookin to install another intake system. I was wondering if an enclosed system is better than on open system. I heard that an enclosed system keeps the engine heat out better. Is there any truth to this?

Cerb...Thanks for your help. I was wondering about the injectors. I readjusted the valves yesterday and it seemed quieter and I noticed a bit of a change the way it ran, for the better. I did check the unloaded mileage, it's 21-22 mpg on the lie-o-meter and when I'm towing, it goes down to 14mpg...

which cold air intake is a better one to use. I'm not trying to be a wise *** but, I've been using K&N filters on my 2000 f150 and my Harley. I never had problems with either one of them. Is it just the diesel K&N intakes that are bad? You're not the first one to tell me to get rid of it. What's...