Search Results for Query: *

maybe i will pull each bolt and clean the anti seeze off when i get a chance.

well drove a couple hundread miles and still tight.

Just got new tires on my truck last week and the front end just dint feel right. I crawled under to find my (4) hub bearing bolts loose on both sides. very loose on the right. I could of swore I properly torqued them last fall when I replaced u-joints. I did anti seeze them as well around the...

Just bought some new BFG AT at sears 265 75 "E" tires. Last couple of days I found the truck to be a bit squirrly so I checked the tire pressures. I found them to be at 50 in front and 80 in the rear. After i read some other posts i changed them to 60 front and 50 in the rear. I drive alot...

I have been running fleetguard up until last oil change. I was at farm and fleet at the time and they had no other. Oh well I will put a fleetguard on ASAP. I did not know this was a issue with fram until now. :confused:

I have a fram on mine and its still running.

Very Nice Pics. I like the color too. Good luck with your new purchase and keep us posted

Well I have dropped the pan and adjusted bands. Eating lunch now then getting back to work. I have to put the new filter on and fill up. Also I am going to try to get some lube in the cable housing.

Ok I crawled under the truck and the valve that the cable attatches to feels sticky. It is all rusty on the outside so I hit it with some kroil and see if I can free it up. Right now it will not return on its own by the spring. I am pretty sure this is my problem.

Does your throttle pedal feel light when this happens?? Because that is what mine is doing right now but I dont get a engine light though.

My 99 Transmission does not like to shift out of 1st gear on light throttle. This happens usually after a 3/4 to full throttle start. I can usually feel something pop back in the pedal like something is hanging up then shifts fine. Could this be the APPS??? Does it have a spring inside hanging...

I am interested. For my 99

Well I have got the box and harness back. They could not find anything but still reflashed the quad at no charge. I plugged it in and still get a code. I have been driving the truck for a month now without the quad plugged in with no 237 code. However I am having problems with the trans shifting...

That is good to know about Don Miller. About 30 min from my place. Glad it all worked out well

The box has had the latest updates. Talked with Jeremy at quad and he had my check some things. I am now sending the box and harness to quadzilla to get checked out. Must be something in the box. tripple checked my connections and checked my harness with an ohm meter all goes back to the box. My...

Well I left a message quadzilla. I will let you guys know what I find out. Drove again today with truck stock and still no check engine light. Light will light right away when you plug the quadzilla in.

I will double check the quadzilla harness. But the truck runs fine with out check engine light when quad harness is not hooked up. I will still check voltage at the map sensor to verify. Drove back in forth to work today without a check engine light and also no stummble at low rpm quadzilla un...

Got a check engine light with a code of PO237. Checked connections on sensors and narrowed it down to when I dissconnect my quadzilla max mileage w/zxt I dont get the check engine light. as soon as I replug the harness connectors check engine light again. could it be the quadzilla box??? I see...

sounds like 285's are the way to go on my h2 wheels. I think the 265's would work too but I have seen quite a few w/285 and they fill the wheel well up nice but not too much. And I think I will stay with the BFG all terrains, I have been very happy with them. Thanks for your replies on your...

Yea its seems ok when I am running at 55 -60 mph but as soon as someone is poking around in front of me at 45-50 I doesnt want to drop out of OD and starts to lug so I am manually takining it out of OD. Sometimes I wish it had a gear in between 3rd and OD gear.