Search Results for Query: *

Sorry for the long post, but Bottom Line Up Front: Dorman Part # 525-104 fits. Good info for those with 1999-2000 with cruise and radio controls on the steering wheel. I have a 1999 2500 Sport. My clock spring (CS) crunched last weekend, due to fatigue (sticking while turning wheel) and my...

bfinn100, Try checking the #9, 10A Engine Fuse in the panel on the driver's side dash. I had this happen to me a couple of months ago when I installed a Raptor fuel pump on the frame. Couldn't get the pump to run when I turned the ignition on, or on bump start. Hooked up my SuperChip...

GreggNoble, Sorry for digging up an old thread, but I noticed that you ordered and XRF adjustable track bar. Mind if I ask how it is holding up? I need to replace my Luke's Link modified stock bar after now having to shim it 3 times. I've found an XRF dealer here in Colorado Springs and...

rx7pat, Glad to hear it worked out for you and that you're back up and running.

rx7pat, Not sure if you're close to Fullerton, but I recommend calling Mike at Inglewood Transmissions (714) 870-7300. He is one of Dave Goerend's certified installers. He installed a full Goerend in my truck last year before I left California. Nice guy and really knows diesel transmissions...

Rob, I've had great performance out of the Duralast Gold batteries from Autozone. My 99 starts quick in cold temps in Colorado. 3 yr free replacement and I believe prorated for 8 yrs after Also, 1 yr free jump start if needed. I did have on with a bad cell at about the 3 yr mark. The...

RHodgdon, I replaced my BFG AT's with Hankook DynaPro ATMs on 07 Power Wagon rims. Got 45K out of the BFGs and they hooked up in mud and snow when new, but had terrible road wander. I am very pleased with the Hankooks. Track straight, smooth ride and quiet. 3750# load rating in LT285/70/17E...

Photos just after install of 2007 Power Wagon Wheels and LT285/70/17E Hankook DynaPro ATMs (3750lb rated) Close-up

Photos just after install of 2007 Power Wagon Wheels and LT285/70/17E Hankook DynaPro ATMs (3750lb rated)

Photos just after install of 2007 Power Wagon Wheels and LT285/70/17E Hankook DynaPro ATMs (3750lb rated) Close-up

RABruce, Thanks for the reply. I've been trying to find a set of the the 3rd gen alloys, but keep missing deals. Saw these and am going to try and snag them before they're gone. Thanks again.

Question for you lucky dogs driving around in snazzy new 2010 SRW trucks. Anyone know the offset and backspacing on the 2010 factory forged aluminum wheels? Understand they are 17X8? I found a set of '10 rims that I'm thinking about getting for my '99, but want to make sure they fit...

Update I decided I couldn't part with my '99. No payment, for the most part does everything I ask of it and I know it like the back of my hand. Ordered a transmission from Dave Goerend yesterday. Now I won't be able to sleep for the next 2-3 weeks in anticipation of delivery!

Superglide, My opinion, for what it's worth. I replaced the OEM shocks with Edelbrock IAS shocks. I was really happy with the ride for the first 25K miles. Fairly smooth on the highway, but didn't like the tune and dampening as much on rough mountain roads in Colorado. Washboard roads were...

121,000 miles. 2nd VP44, 3rd OEM LP on the way out, fuel level gauge needs replaced, nursing a sick 47RE (Goerend planned), going to 3rd Gen rims and Toyo ATs, cracked dash, Hydra-boost leaks, need air bags. I love the truck but am torn if I should sink $7-8k to fix or sell invest the cash...

Configuration: Westach 16psi gauge/sender mounted on top of filter/post filter port, 3rd Carter LP in stock location. Over the last week or so I noticed my lift pump pressure had started dropping and was inconsistent, down to around 10 psi idling and could pull down to around 7 psi at half...

I'm a strong coffee drinker (Navy habit), so I like the smell. Try filling an old sock full of dark roasted coffee beans and throwing it under the front seat. Works for me. Also keeps a refrigerator from stinking when you have to move it or put it in storage.

HSkinner, I replaced my VP-44 last Sept. Mid-West Fuel Injection has great prices, the pump was at my door 3 days after ordering and you can talk to their technical staff if required. Diesel performance parts and accessories. Diesel injectors, pumps, filters, kits, additive, gauges and...

I second the boost leak possibility. I replaced my dead VP44 and lift pump in September. It ran great for 2 weeks then just really seemed to not have any power and loud, like it was really working hard. Couldn't figure it out until this past weekend after I finally got around to making one of...

13MWZ, Congrats on the new toy and welcome home. I too treated myself to a Harley after one of my deployments. 2001 FLSTSI Heritage Springer with a few add-ons over the years, Screaming Eagle pipes, breather kit, Harley Race Tuner, windshield, rider backrest, passenger backrest to keep the...