Search Results for Query: *

  • Users: EEJ
  • Order by date
Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
  1. E

    2nd Gen Non-Engine/Transmission catastrophic steering failure

    I had a similar thing happen many years ago with my 95 1/2 ton. I was in shopping center parking lot, made hard turn, hard a pop, and lost my power steering. The pitman arm shaft seal had blown out. I don't know if the steering boxes use the same seals or not, but I had to buy the seals from...
  2. E

    2nd Gen Non-Engine/Transmission 2nd Gen Front Tow Hooks

    I bought the shackle mounts off ebay. They were for 3/4" shackles, but I reamed the hole out to 1" so I could use 7/8" shackles. If I remember right, they cost $20 plus shipping.
  3. E

    2nd Gen Non-Engine/Transmission 2nd Gen Front Tow Hooks

    I wanted to add some front tow hooks to my 2wd truck, but didn't want to spend the money for the factory Mopar ones, so I built one with shackle mounts and a 2" receiver so I could add a winch. Here's some pictures. The only problem with it is that the box tube should have been about an inch...
  4. E

    1994 - 2002 Dually Fender LH

    One driver side dually fender of a 1998 1/2 - 2002 dually. Will also fit a 1994 - 1998 1/2 but you will have to drill a hole in the bed or move some of the bolts on the fender. The fender has no cracks, but is missing some of the bolts. $400 obo. Local pickup only, please.
  5. E

    Engine/Transmission (1998.5 - 2002) Fuel pressure during Wait to Start

    I have a 2001 3500 with a Fass DDRP and Big Line relocation kit that was installed about a year ago. A few weeks ago, I installed a Westach fuel pressure gauge. At idle it's running 18-20 psi. When I turn the key to the on position, the pump will for a second or two and build to 18-20 psi, but...
Back
Top