Search Results for Query: *

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
  1. R

    2003 3-guage A-Pillar set

    guages They have been sold-Thanks!
  2. R

    Let's See Your RIG...

    I!ce rigs
  3. R

    Disable Integrated Brake Controller

    Amazing - I finally got the dealer to agree to replace controller - I took the one out of my truck and they were going to pull one off a truck on their lot - PROBLEM the 3500 is different than the 1500 & 2500 and they did not have one. While mine was out I cleaned the contacts and greased them...
  4. R

    FOR SALE, Filters, and drive belt

    I am willing to purchase these from you if they are not sold. Give me a call 315-391-1316. I live in central NY as far as the shipping goes.
  5. R

    Disable Integrated Brake Controller

    Thanks, I have placed several posts because of this - I have mine set on Heavy Electric- 10 and do not feel comfortable about the stopping power, I have a 2011 40' Jayco pinnacle and I have gone as far as replacing all four brake assemblies (plates, magnets and shoes ), rewired the axels to #14...
  6. R

    Disable Integrated Brake Controller

    Asked dealer to disable brake controller on signature truck I was told they can not do this. I was sure that I thought I had read posts that members had gone to dealers to disable the factory installed integrated controllers. Dealer said no way to do this - is this right? I also had read a...
  7. R

    2012 intrgrated controller

    Went to dealership today to have them test brake controller - set on 10 it just does apply enough braking force. I have checked magnets (3. 2 - 3. 3 amps to each one, 13. 3 amps total), brakes are new, burnished in and adjusted. I tested the current from the emergency slide on the controller and...
  8. R

    Show us your truck WORKING

    Nice combo - I had a Sundowner 3-horse with living quarters but yours appears bigger. I showed quarter horses for over 25 years but, have recently gotten out of that to have some free time to travel. I envy the truck, I had a 2003 set up pretty similar and I loved it - wish I had it back, the...
  9. R

    Show us your truck WORKING

    , Getting ready -Syracuse NY to Glacier, Bamf, Lake Louise, Jasper, Vancouver, Vancouver Island into port Angeles Washington and then some route back to NY. Really looking forward to hitting the Road! Wish I had not gone so big on the 5ver. 40" long and 13'6" high - creates some highway and...
  10. R

    2012 intrgrated controller

    My 5ver is 16,000 lbs and brakes worked great on 2003 with the prodigy, but the 2012 with integrated on 10 is very marginal.
  11. R

    2012 intrgrated controller

    From what I have read it seems from posts that the integrated controller on the 2012 is supposed to be free of previous issues. I would like to hear if others are also having problems with the controllers on 2012 vehicles. Mine has never worked right since new, but it has gotten worse...
  12. R

    Placement of Brake Controller in 2012 2500

    I really like what you did and will probably copy - nice job and pictures! I would also like any information on the wiring you did so that the EVIC message was not coming up. I have read numerous posts but since we both have the same exact trucks I would appreciate your comments. Everyone...
  13. R

    Axel fluid capacities

    Can anyone tell me what the fluid capacities are on the front and rear axels of a 2012 3500 4x4 HO. I have seen 122 oz. for the rear and 76 oz. for the front, but I am not sure that is correct for the 2012 with the new finned cover. :confused:
  14. R

    Injector check

    I really appreciate all of the comments. I can live with the towing mileage, but from other posts I was reading it seemed some members were getting 15-16. 5 MPG when running empty with a comparable truck- off course there may be slight differences. . I usually tow around 65-72 and my truck is...
  15. R

    Wheel to Wheel Running Boards?

    Almost identical to mine; Nice Truck! How many miles on it and what are you getting for fuel mileage empty and loaded? I am concerned that I am only getting 8. 9 pulling my 16,000 lb. 5 er, and 12. 9 max on highway empty. getting ready for about 16,000 mile cross country to Vancouver BC and...
  16. R

    Injector check

    Injectors Thanks, I will give it a try. I get a little concerned when I think of approximately $7000. 00 in fuel to do a 16,000 mile trip. last rip between towing and just site seeing with truck empty came up with 9. 1 average, but that was with mostly towing miles. Does this lubricate and...
  17. R

    Injector check

    Can anyone clue me in on the correct process for a dealer to check to determine if there is an injector problem? I just had the oil changed and I am watching the levels very closely. I am planning a 16,000 mile trip from Syracuse NY through Canada to Vancouver Island and then back through...
  18. R

    Lock-Out Hub Conversion

    Ed, I have approximately 12,000 miles on mine and I did first oil change at 2900 miles and two others at approximately 4500 miles, I check oil frequently and have not noticed the level being excessively high over the full mark. I will watch this closely - Thanks. How much of a difference did...
  19. R

    Lock-Out Hub Conversion

    Bob -several trips were nice open road 55 to 60 MPH. I agree this does not seem right but it has been checked by dealers in Syracuse, NY and Panama city, FL when I had oil changes, they do not have any suggestions. I could understand if I was going 75-80 mph, but I do not understand this - open...
  20. R

    Lock-Out Hub Conversion

    Just got back from a 9342 mile southern trip pulling 16,000 lb 5-er; new truck rides beautiful and has all kinds of power, but fuel mileage sucks. I wondered if anyone has done the lock-out hub conversion and if so has it helped the mileage enough to cost justify it? Spent $$3985. 25 in fuel for...
Back
Top