Search Results for Query: *

I also had the middle clamp fail / it is about a 6 inch clamp and local dealer had part numbers for either end clamps but the middle clamp was not listed sperate so I bought a regular hose clamp and used that , I sure wasnt going to pay $300.00 plus for something I didnt need

I am closing in on 65 k on my original general tires , doing a 7 tire rotation every 7500 miles , getting pretty close to the wear bars so I will replacing them before winter

I wonder if he tried to stiff them ?

Baldwin also has a fuel filter for the severe fuel setup #BF46050

Look in to the I-Ball camera system , I have one works good and not much coin to buy

I spent 18 years as the head sawyer in northern Wisconsin in a hardwood mill running mostly red oak but other hardwoods 102 inch long sticks , electric over hydraulic set works with 60 buttons or levers in the cab about 3 million board ft a year not big in todays big mills Then spent 2 years...

My wife was complaining there were not any sparks between us any more so I got my tazer she doesn't complane now but I have to sleep with one eye open now :):-laf:-laf

My wife and I have a trip planned for Alaska this year leave early July back late September

Right now waiting to see what Ram is doing about the air ride on their 3500s before I sell it

There is a way to remove the nails that will not hurt the steel ie.. dent etc you need to make this tool-buy a pair of horse hoof nippers and a auto dent removal tool/ the slide hammer type/ weld the slide hammer to one handle on the nipper - to use open the jaws of the nipper and close behind...

I cant promise anything right now but if the dealer treats me right on a 2015 I will be selling mine( of course I will have to have my new truck before I sell )

To help hold a WET edge mix Flotrol in with the paint. It will not dis color the paint I use it whether I roll or spray

Big I just remembered there was a WW2 ace named Douglas Bader not sure I spelled the last name right but he had two tin legs due to an earlier accident (both legs at the knees I believe)

I second AOPA also check out the EAA I belong to both and if you cant find the answer on the web then a call to either will get you an answer or a direction to go Being in the mountains you will need a instructor that can all so teach you about mountain flying . There are strips that the...

The IBALL works great you can put on the trl or in the truck bed I also used it when hooking up the snow plow

As a carpenter /builder Menards is where I do a lot of shopping was just there today, his main office is in Eau Claire Wis (french for clear waters) was a big lumber town in the day I live just north of E. C and have been in his plants -steel forming pole barn steel and trim -door - truss-...

One thing about radiant in floor heating is that EVERYTHING in the building if it has been in there for awhile will be close to the same temp as the floor also if you live in Il there must be a Menards store close ,go in and look at the set ups on display this will explane alot of what is stated...

Well here is are some guide lines for the area I live Northern Wisconsin/2 hrs east of Saint Paul , with a post frame building you will need to ring the out side edge with 2 inch high density foam 2 feet deep puting it on edge-then approx 2 ft down on the out side you need to go out 4 ft at a...

I had them on my 02 with a Cody gooseneck hitch and a set of 5th wheel hitch rails in the bed no problems with the install or operation

My first change on my 11 came on around 7,300k second time at 13,900K I live in rural Wis and most of my running is 30 or more miles or long trips pulling the 5ver