Search Results for Query: *

Mike, insn't there a state park nearby ? Used to ice fish down your way, 3 mile or twelve mile maybe ? I pull a 30 ft 5th wheel and don't want to be in your way. Mike Winter

sheet metal, pop rivets and some seam sealer/caulk .

Thankyou everyone. :-laf

Count me in. PM me a reminder when it gets closer. Mike

Anyone have the speedy sleeve p/n ?

Thankyou you nailed it. The inner seal was installed over a fubar axle housing. Apparently the guy that did my brake job missed that detail. Should have done it myself.

My 93 does the same thing. I don't go all the way down with it. If it doesnt want to power up I grab top of window and lift up on it while holding the switch and she flys closed. I've been dealing with other issues lately and havent got around to chasing this problem down. Let us know what you...

OK I know I've read it on here somewhere, but my rear brake drum is leaking 90 wt. It's coming from between the outer face of the brake drum and the hub flange. Not from the axle flange. One would think that if the axle seal was leaking, that the inside of the drum would be wet and my shoes...

Looking for a fender badge for my 87 dodge. Must have fallen off on the way to town yesterday. It's a single wheel 350 4x4. The square emblem that is just behind the word RAM. Kinda wanted another 1 ton piece. Any help would be great. thanks Mike

Hi Mike Thanks again for the awesome back issues. Like I said before hoping to look you up my next trip to the inlaws house in Boise. Would it be possible to obtain your address? Thanks Again Mike Winter

Yup, I can hardly wait. Should be pretty straight forward, as far as conversions go. Mike

Hello, was considering putting my 84 suburban body on a recently wrecked 93 regular cab 4x4. Both are auto's, was looking for the right donor to do a cummins converion with, and this truck came my way. Anybody ever tackle a project like this ? I think it would be easier to just rebody rather...

Hello, was considering putting my 84 suburban body on a recently wrecked 93 regular cab 4x4. Both are auto's, was looking for the right donor to do a cummins converion with, and this truck came my way. Anybody ever tackle a project like this ? I think it would be easier to just rebody rather...

Any tips or tricks to removing fuel injectors? 4 of them came out difficult, but as expected. Two of them wont budge. Tried threading a nut on end and using slide hammer technique... ... . Didn't work. Soaking them with penetrant now. Anything else I can try? Mike

Yeah they're like second cousins. New lift pump, I was thinking there was a washer or something that goes bad on a fitting near the IP.

Hi Guys, just purchased an 89 to fix up for my son, who is overseas in the desert defending our freedom. Problem one. Turn key to 'on' position and no wait to start light. Checked solenoids under hood and no power to the small wires. Where should I start? Problem two. Previous owner claimed...

Gear ratio? It comes down to 3:55 or 3:73 w/ auto trans. When I purchased my 01 several years back, I noted the axle ratio before getting behind the wheel for a test drive on several trucks. It's located on the sticker on bottom side of hood or in the glove box. I'd be curious to see what the...

I have two trucks. My 01 needed a pump @ 105k miles. My 99 is still runnning original with only 300k on it. Knock on wood.