Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
Ok... I think we have something mixed up here. The governer, from my reading and understanding is designed to increase the delivery of fuel (to increase power) as the load increases and then reduce it as the engine load decreases. I read this from a post on TDR dated five or so years ago with I...
Sorry, its a 4k. Don't recall the brand tho. And I would normally agree on adjusting them, but as I mentioned I had them down to . 075 and then I did not mention the stud protrusion was loosened to . 050 and it helped the low end but the OD issue remained so I loosened it again to . 040 but that...
Someone has to be able to help me here. I hooked the fuel pressure gauge up and I am running around 27 psi at idle and it dips down a little. The lowest I saw was 25 or so psi and the highest I saw was 42 psi or so. And when the truck hits OD it is not pulling hard like it did. It hazes at WOT...