Search Results for Query: *

No its too small its not even 1/16 NPT JUST UNDER A 1/4 " D Just a bleed screw I think and its before the filter.

I looked pretty good for the other washer, I look again. Not sure what size the bleed screw is yet awful small but shouldn't it be after the filter ?

the fuel in the filter was clean so i left it at that, bleed the injectors and started it up. I took the high pressure line off to try to check the o ring, and at the filter end i dont know what you call that bolt but it had a washer on it between the banjo and the bolt head, but there was no...

I tried to do a profile on my truck but it said NA 91.5 est 550,000 miles (the speedometer and odometer dont register, i think that may be my ecm everything else seems to check ok) 60mm compressor on the turbo, banks 4" exaust and muffler and gear vendor over drive w/ Getrag 5 speed. As far as...

about a week ago i took my truck about an hour out and on the way back as i was coming to a stop in the road she idled down and stalled (the low fuel light had just come on so i should have had about 100 miles to go) i dumped 5 gallons in the tank cranked it it started but rough then it died not...