Search Results for Query: *

SOLD. Thanks for looking.

FYI: Just received a recall on the passenger side air bag. Jim

More info: truck is in SE PA, Lancaster county, near the PA turnpike. Would make a nice project truck for someone who would need to upgrade the trans anyways, Thanks Jim

2006 2500 4x4 club cab Laramie 317k mi Black Grey Leather Stock 5.9L Cummins 2nd owner, bought at 17k miles in 2007 Rebuilt injectors installed at about 250k New batteries Spray in bed liner Plastic drop in liner Tool box Bed roll up cover Bed has 8" hole under bed liner from 1st owner. Needs...

I put a new fuel filter in late Sat night, filled w/ Sea Foam, ran about 1 min. Let sit until sunday night. Drove truck about 10miles, still has stumble, more noticable once it was @ op temp. Maybe not quite as bad, hard to tell. When I rev it in idle it runs rough from about 1400-1600 & then...

Hey Freebore, thats a great idea for the insulation! I was going to try to buy a replacement or sew somw webbing into the current stuff, but I like the glue it idea much better. Filters and oil test kit arrived. I located a better clicker for this torqe range. As soon as I get past this block...

Cerb, I took a closer look very late last night & discovered that I have some insulation falling down on the back of the engine. #6 still looks pretty tight, but not a bad as I thought. I am going to need a better clicker type Torq wrench. I was considering a trans swap to a HD manual which was...

Oh and I am planning on a filter system upgrade soon on the '03 and if the '06 still looks viable then it will get a filter upgrade also. I need to get a good handle on the '06 condition. I would like to keep it for quite a while longer (why I bought a diesel). With two CR 5.9s I need to figure...

Thanks p-Bar, the 06 had after market rebuilt injectors at about 270,000mi. I tried to always use fleetgaurd 7mic filters in the stock loc. When I get more filters I am going to change again & run all of the easy cheap tests, check the exhaust temps again. I do not think my current tester box...

I am waiting on fuel filters & oil test kit right now. I did get to talk to a mechanic that works on these engines, mostly for industrial applications (specilized trucks). They actually do very little testing, they run multi stage fuel filters (water, 10mic & then to 2mic). On an injection...

Thanks for the suggestions. I put a fresh tank of fuel in it and I am going to change the oil, test it and change the fuel filter (only has about 2Kmi on it but you never know). If I do pull the injectors, would a compression test tell me much? Note that it idles fair now. Does a bore scope fit...

Thanks, I have a recommendation for a local medium duty truck shop. I did not talk to them yet, do not know if they work on these Rams yet. I would like to take the home repair as far a possible because I have two of these 3rd gens now and I would like to eventually put a 4bta or ISB 3.9 into a...

Hi, I usually find all the info I need just by reading posts here, but this time I could use a little specific help, and thanks for all the great info here. 2006 5.9 4x4 Larime Quad cab auto, stock, 316,000mi, 41,000 miles on acme reman injectors (yea, probably not a great choice, was slammed...

06 101,000mi. Front axle u-joint 2 days ago, water pump pully broke @ 60,000mi. Needs shocks & has a rattle I have not yet found, steering is getting a bit loose, 20mpg. Last truck 2000 Ram 2500 5sp, totaled @ 240,000mi (suburu hit me, truck saved my life) only failure ever was the oil pressure...