Search Results for Query: *

On my 06 CTD Dodge I can't find either a fuse or relay in the PDC marked for the fuel pump. Can anyone post a wiring diagram with the color coding for the feed to the pump? Thanks Rick.

I have an 06 Dodge CTD 4wd 2500 and three 2nd Gen. Dodge CTD'S. Can I use a 2nd Gen. adjustable track bar in a 3rd Gen. truck, Then use the OEM 3rd Gen. track Bar after rebushing in the 2nd Gen. truck with the bracket from the 2nd Gen. kit? Thanks Rick

Can anyone tell me what the bolt torque is for the three steering box mounting bolts on a 06 2500, 4wd? Thanks Rick

We recently added a 06 CTD 2500 4wd to our three other trucks. Today the steering shaft broke off at the pitman arm. Luckily the truck was just leaving the driveway when it broke. It looks like it was cracked halfway for a while judging by the rust at the break. Has anyone else had this happen...

I'm looking at a 12V motor out of a 95 Auto truck to put in my 95 5 spd truck. Can I get the difference in HP between the Auto and 5spd up without sending the P-Pump to the Inj. Shop. Where is the difference adjustments or parts? Thanks Rick

I changed the L/P on my 95 Dodge 6 months ago with a new one from ebay. It has now gone bad. I removed it an checked it against a pump that came off a 98 Dodge. I found that the cam plunger on the ebay unit was a 1/4" shorter than the Carter pump from the 98. Both trucks still had the...

I have a 95CTD with a 5spd. After having the throttle linkage Recall done I noticed a bucking problem when on rough roads. I checked the area where the Recall was done and found the long bolt that holds the spring bracket backed out and no bracket or springs. Checked with the dealer that did the...

I want to add relays to the headlight wiring on my 99 Dodge 3500. Can anyone tell me when they went from switched power to switched ground? When I checked power at the headlight harness plug I had 11-12V at pins A-VT/RD & C-RD/OR on low beam and A-VT/RD & B-VT/WT on high beam. Should it be...

I am replacing the broken sport headlights in my 98 dually. The prior owner installed Hella HID'S in the outer bulb sockets wired to the low beams. I want to rewire using relays and have the low beam HID'S stay on with the high beams. Does anyone have the proper wiring diagram to do this...

On a trip back from Lake Placid this weekend my son mistakenly refueled the truck with E85 ethenol. It was idling at the pump and stalled out while refueling. The tank was close to empty before refueling. He had it towed to a shop and they drained,flushed,& bled the system. Changed filter also...

I have a 98 Dodge CTD with aftermarket sport headlights. The ballasts are Hella's with xenon bulbs. The HID's are wired to the low beams. The high beams are wired to a 9004 bulb. Is this correct? Does it matter which bulb sockets are used for each? Thanks Rick

I just installed a GDP392 lift pump kit in a friends 01CTD as I did in my 99CTD awhile ago. I notice that the pump does'nt run for 4 seconds when the key is turned on in the 01 like it does in the 99. It will run for 20-25 seconds if I bump the starter though. Has anyone had this problem or know...

My neighbor lost fuel pressure on his 2001 24V and couldn't get it running. I scanned it for codes, no DTC's found. Checked fuel pressure,it was intermittent and went from 8lbs to 0. I replaced the fuel filter and stock lift pump with a GDP 392 lift pump kit. Had 18-20 PSI with new pump but...

Can anyone tell me the type and size of the inlet and outlet ports on both the fuel heater and lift pump? Thanks in advance Rick

Can anyone post the A/C wiring schematic for my 95 2500? I have no power between the A/C clutch and the relay. I ordered a service manual from Genos quite awhile ago, but it's still on BO. Thanks Rick

Hi all, I'm planning to upgrade the steering linkage from the Y style to the T style on my 95 Dodge. Can anyone tell me if I can use the same drag link adjusting sleeve and tie rod end at the Pitman arm that are currently on the truck? When checking part numbers for the tie rod end at the...

Hi all, I'm doing some cooling system work on my 95 Dodge 12V. Does anyone know the correct size of the frost plugs? Are they Metric? I measured the block heater at somewhat over 2 1/4". My local parts store doesn't show a listing. Thanks Rick.

Hi all, I read somewhere about Y & T style tierods on the dodges. One is suposed to be better than the other. Does anyone have any info on this? Thanks Rick.

Hi all, I'm fairly new here and am hoping someone can help me with this. On my 99 Dodge 3500 I've been having a problem keeping my lift pump running. It will run for 4sec. when the key is turned on and 25sec. when cranking as it should. But when the engine is running I will either loose...

Hi all, I'm fairly new here and am hoping someone can help me with this. On my 99 Dodge 3500 I've been having a problem keeping my lift pump running. It will run for 4sec. when the key is turned on and 25sec. when cranking as it should. But when the engine is running I will either loose...