Search Results for Query: *

Ok I was wanting to get some opinions. I was driving to CO with about a 12 k trailer from indiana. I made it to the CO border and notice it went hard into fith gear after getting back on interstate. Got off the interstate in a couple hundred miles and when I let off the gas it makes a clicking...

i have 110 on my truck and have the head off and at a shop. i want to have it checked for cracks and trued up. the shop wants 550 to go though the whole thing and recomends that. it is only 150 to deck the head and check for cracks. should i get the valves ground or am i ok with only 110,000...

How many of you had this happen? so i found oil in my radiator today. i know it could be oil cooler, head gasket or a cracked block. i am just wondering how often these motors crack. if you haven't guessed it by now, i have one. will pull oil cooler over the weekend or sooner if i can and...

ok so i have a strange gargle coming from the dash. it does it when it sits at idle intermittently more when it warms up and if i give it rpms it goes away. it will also do it on a down shift sometimes if i use gears to slow down. my heater has also decreased in heat as well. the sound apers to...

ok i have had many issues with my gearbox as some may have read but now that everything is great with that i have a new issue. after getting truck back i had a bad vibration i couldn't figure out. i pulled about a 14k trailer yesterday and found out the problem. my rear u joint broke they left...

just wanted those to know that as far as i can tell all the parts for our nv4500 were now coming from china and india after new venture (oem) stoped producing them. quad 4x4 won't even sell parts for these anymore because they are junk, but as of this week i think i have found a company selling...

i have had two rebuilds now from midwest trans and one lasted 3k before the fifth gear nut fell off. the second one lasted 2k and i belive the shaft or shafts broke cause i have no gears at all and it spins by hand with the gearbox out. i am sending it back in for warrenty again. i tow a 18k...

my question is do i have a electronic sending unit that can be changed by a computer or is it a gear that needs to be changed? thanks

so after great thought on weather to spend the $$$$ on the new intercooler i was a buyer. so was the purchase worth the money? the truck is the 98 12 valve it has all in the sig plus s&b intake, plate 1/8 less than half way, screw all the way out, 34 12 tires and new 4. 10 gears,air intake...

i have done some research and would like to get a spearco intercooler. just wondering were i can get the best price? best i have found is 1300 seems kinda high compared to some of the other brands: ats for 1000 and so on.

I am ready to purchase a set of traction bars and i have read all the forums but the lsfarms web site won't come up. i don't like the tuff country bars and have had some bad luck finding any. anyone got a number to call to get some ordered? i want mine jointed and prefer a bolt on installation...

i have a industrial injection silver 62/14 and was wondering if someone else has this turbo on there 12 valve. I can run down the road at 75 (not towing just empty) and have no boost at all. It builds 40 pounds and more if wastegate blocked but just driving down the road it doesn't have any...

just wondering of a good shop in boise idaho for new u joints, carrier bearing and do a 3. 54 to 4. 10 gear swap or if someone out there wants the 3. 54 and would like to swap i will be here for 2 weeks to a month. I just tow to heavy with 34 tires to keep my gearing only 90k on my gears. also...

need help to get a pump set up right and fix a fuel leak. need recomendations on a good shop or someone that could help me near here. had a shop in ut do some work (and mess ups i guess) and deliver the truck to me in denver (long bad story) and i can't tow my trailer out of here. runs way to...

hoping to find someone that can do magic to my p7100 pump. i have 4gsk #10 plate and had it rebuilt. also installed a new ii silverbullet and fass 150. it needs tuned up bad! had a shop do it in st george ut and they messed it up can't tow and i have to leave denver(was delivered to me hear and...

this truck sat for about 3 months everything fine when parked. im on a trip to go to utah and the truck just won't warm up. the engine temp is at 140 and stays there. usually it runs 180 consistantly. the heater barley works now and i don't know if it is the t stat or what please help. it is...

what i was wondering has anyone actually made there own tc lock up switch on a o6? i know that it can be done on 47 re but what about the 48 re? i have ben told know one has ben able to get it not to throw codes but if it can be done what wires do i need to tap and does the reley still work...

i had many shift issues with multiple trannies and after what was thought to be a toasted trans the dtt shift enhancer box fixed them all. at 275 dollars man what a buy. this product is worth 10 times that. i am not affiliated with them and don't even have there trans i have a suncoast, but it...

after a full build again i have a another problem. i am getting 2 codes a p0341 cam performance and a p0336 crank performance code. the truck seems to run fine till you hammer down it surges and feels as if it is lack of fuel but doesn't seem to be that pressures good on pickup and rail. any...

i guess i should of read the rules a little better sorry with the first post. anyone with bd parts and have had problems with them please email me at -- email address removed -- or pm me and i would be happy to talk to you and help you out if i can. i have had problems from every part i...