Search Results for Query: *

Ok, I’m needing a little help. I have a 04’ that has a FASS that is hard starting. I have changed the rail pressure sensor, fuel pressure relief valve and fuel control actuator along with filters and still hard starting. Rail pressure is at 6000 idling and ramps up to 15-24000 under load. I...

I recently bought and placed Nitto Ridge Grapplers on my truck and really like the way they look but…they seem to be very hard or stiff , for better words, when traveling over bumps, tracks etc. I have let the air pressure out from 65psi down to 55psi in 5 pound increments and still the same...

I searched for an answer and have yet to find and answer so I'm going to turn to the experts for help. I ended up replacing my motor on my wind shield washer at the fluid reservoir due to me getting very little fluid if any out when the button is depressed. I followed the line in search of...

I have an issue with my passenger side head light. When low beams are on the pampas doesn't work but it does when on high. I thought it was a bulb issue, but after replacing the bulb I have the same issue, just to make sure I placed a third build in the socket and the same thing happens. So...

I am fixing to have to change rotors all the way around. Can not have them turned anymore so I was looking at improving what I have or getting something better. I have searched and see that some like power brakes or others and was thinking of possibly trying them out. I have been using OEM...

Looking t ok replace my ball joints in my truck and was wondering if anyone knew the model #'s that I needed for my 2004 Dodge 4x4 2500. I have called and gotten numbers from O'Reilly's but was going to double check before ordering them. just dont have the money for Dynatrac at this time...

I have replaced the window switch to the drivers side door due to the intermittent working it was performing. After doing this I have the same issue so I have attempted to look for a harness to no avail. Does anyone have any suggestions or experience with this issue? If so anything is...

Ok I looked everywhere for weather stripping. And when I think I have it, the little dictionary of the site says "does not fit". I know someone here has replaced their weather stripping, so does anyone know where I can find it or know the part number for this item?

I have an issue with my driver side brake light and third brake light. I was pulling a trailer before this happened, I was pulled over by DPS and they stated that I din't have brake lights in my third light or drivers side. I have checked all the fuses and the all are good, and no "lamp out"...

Well my lift pump bit the dust! I explored many options and decided, against my judgement, to go with the Raptor 100. I really wanted the entire set up with the filters but money kept me from doing this. I got the unit put on and then test drove it. Came back and found a fuel leak, well my dumb...

I have a 2004 Ram that the AC quit blowing. At first I thought it was the ignition switch, this happened before and I replaced it and we were back on the road. I replace it again but no joy! I have checked all the fuses I can and everything is fine. Now I'm looking for what to do next short of...

Need some help trouble shooting a problem that just came up. I got back from vacation and found that my truck was on "E" or near it! I thought I had filled it up prior to leaving. As I drove it to work and on errands during the day the gauge started reading that it was increasing in fuel in the...

I am looking for some info on where I can get the replacement foam for my seats back rest for the drivers side. I have looked at the OEM parts online sites and still can't find them. Does anyone know the part number or where I can find it along with the OEM seat cover? I have looked at the...

This weekend while at a livestock showa buddy of mine which driver a 2012 6.7 w/out DEF was broken into at the hotel we were staying at. Needless to say we were really shocked when they stole his Bible, they unzipped the cover and took the marker out of it and left it, maybe they will read it...

I'm having to replace one of the transmission cooler lines, the top rubber line that has the check valve on it. When the line came in it looks as though it came with a new check valve already hooked on the "Quik connect" hose. If I replace the valve too is there some kind of thread dope or tape...

I'm having to replace my grille and ended up buying an after market grille that has no emblem. I ended up with a stainless emblem that got off ebay and was wondering how to glue it on. JB Weld is a consideration but thought I would ask some of y'all before I attempt it. :confused:

I had my transmission rebuilt and am having a lot of problems with my tv cable. I took it back to the place that fixed it several times and they can't seem to dial it right in like it was before I rebuilt it. I was told that the computer has to learn the way I drive... is this true? And if it is how...

I had my transmission rebuilt and am having a lot of problems with my tv cable. I took it back to the place that fixed it several times and they can't seem to dial it right in like it was before I rebuilt it. I was told that the computer has to learn the way I drive... is this true? And if it is how...

I was driving home tonight when I pulled in my neighborhood and my truck seemed to down shift and would not respond to me depressing the accelerator. I attempted to shift it into tow/haul and it didn't seem to phase it. It was like I was traveling in first gear! the only thing that would...

I am considering a Frontier Bumper or a Ranch Hand, i've heard alot of good things about both but the one thing that interest me was the weight of each and the effect on the wear of the tires or compressing of the springs or shocks. Cann anyone tell about it?