Search Results for Query: *

Just wondering if anyone in the Los Angeles area can recommend a good shop that works on rear ends?

So my front end was making a growling sound. Transfer case was low so I topped it off. was told it was probably wheel hub/bearings. just changed them out tonight along with the front u-joints. Took it for a test drive and there is the growling noise again! :{ God what a disheartening feeling...

A few days ago my truck threw a check engine light and the following codes - P0300, P0303, and P0305. I checked and confirmed it was multiple cylinder misfire and that it was cylinder 3 and 5. The check engine light disappeared and has not returned. I have never had those codes put up and was...

My old boss used to have an autometer volt meter connected to a small toggle switch so that he could monitor two separate batteries. I was think about doing this not only with a volt meter too. Does anyone know how to wire it? Thanks

I was wondering if any knew of a website that provided the part numbers for cummins parts instead of Mopar? I have a 2003 truck and would like to be able to have it as a reference in case i need engine parts.

I have 03 with auto transmission and need a fuel pressure sensor. the mechanic said that dodge wanted 600. 00 for the sensor! :eek: Can someone provide me with a part number and a source for one? My truck and I would really appreciate it.

03 2500 4x4 w/ 48RE and quadzilla xzillaraider. Truck surges when shifted into drive, reverse, or second from park. runs fine on the road. truck never missed a beat. feels like throttle may be sticking because from a stop truck wants to pull. kind of like when your driving with both feet... one...

Hi there. I have an 03 dodge with just over 100k on the odometer and was thinking about getting some upper ball joints for it. I went on Kragens website but they offer three different degree's of camber. everything from 1/2" to 1-1/2". How do i know which ones to get? is it something that only...

Hello: I just installed an Airdog 100 in my 03. Prior to this I had the fuel pressure gauge sending unit (from Quadzilla) attached to the CP3. Now I have the fuel hose running directly to the CP3. Where can I attach my sending unit so that I can monitor fuel pressure on my commander? Thanks

The lumbar control switch has stopped working. Anyone run into this issue?

I lost one of the clips that hold the air filter housing together #@$%! . I was wondering if anyone had a part number for it.

I have a 03 2500 w/ auto transmission and about to hit 100k. I was wondering what the life of the catalytic converter was. This is my first diesel so I am not too sure. I had a 97 dodge with a gas engine and that had O2 sensors. At least with that one I would know if the sensors were throwing a check...

I have been wondering if anyone has installed these in their trucks. If so I would like hear some feedback. Thanks.

Just installed a quadzilla commander and xzillaraider in my stock 2003 dodge ram. What is a good baseline for my guage readings to be?

Hi there. I have a 2003 dodge ram that I recently purchased a Quadzilla Xzillaraider/Commander combo. I was unable to connect the ECT plug on the harness because it does not match the one my truck. Is there a way around it. Can i change the sending unit and plug on the truck so that I can just...

Hello there. My truck, 2003 ram (all stock fuel system), is leaking diesel from behind the fuel filter housing/lift pump area. I think it might be the fuel line going to it but I did not have enough time to really get in there and investigate. The truck has 91000 miles on it. Could the hoses be...

I was told by a salesman of a Southern California RV dealer/store that 19. 5" steel Rickson wheels are too heavy for light trucks and that they cause premature brake wear. Now his truck (Newer Chevy) had 19. 5 Rickson alloy wheels (not sure if forged or cast). The conversation began when I...

I was wondering if anyone has purchased one for their trucks. If so what brand and how do you like it? I have priced some online and at 700. 00 bucks I was shocked. lol... no pun intended. Anyone get one for a more reasonable price?