Search Results for Query: *

I see that the oil sending sensor is leaking. I have 260,000 miles on the truck and it has never been replaced,how hard of a job is it.

I don't know why my head lights keep burning out. It doesn't matter if there top of the line or the cheap ones. I can only get a few weeks out of them before they burn out an ideas?

I've been installing the BD twins on my truck and did stacks exhaust. My MBRP down pipe and tail pipe are in good shape no dents or rust. So I buffed up the stainless steel with a buffing wheel and it looks like new. What price should I ask for them?

Ok I've read a number of posts about head bolts & gaskets. I'am installing the BD super B towing twins turbo set up. I want to know where is a safe limit to set the boost so I don't blow my head gaskets? I plan on fire-ringing & ARP studs for the furture, but can't afford it right now.

I'am installing my BD twin turbos and looking into the exhaust ports I see a black tar like slime coming down the stem. I planned on changing out the valve springs for the exhaust brake I'am also installing. I want to know if seals will fix this or do I need a valve job.

I just moved my new batteries to the bed this summer. I used 3/0 to the starter and also moved the temp. sensor back. Now this morning at 5 below zero seem to be charging kind of of high. I tested it at 14. 9 volts then turned on the blower and headlights and dropped to 14. 5. So where do I look...

I was wondering where I go to buy a new head for my 12 valve one that will flow more air?

I have a 1997 cummins and I have the vacuum pump rebuild kit. I am getting oil in the vacuum lines so I need to change the check valve . Does anyone know the part# my dodge dealer doesn't know what I am talking about?

I am going to put BD twin turbos on my truck . I have a FS2500 bypass filter that is coming off the filter housing. Where do I find another port for the bypass filter?

how many miles on the hub bearings before they need to be re-packed?

I just put a new turbo on and I'am going to go to stacks. I see a forward cross brace on the bottom of the box I don't care to drill threw. It look like to miss it I have to move back. How far should I be from the back of the box?

I just got a new BD exhaust manifold. I thought they came per drilled for an EGT probe where should I drill it for the probe?

I have a new fuel heater and fuel lines. The truck will start up in the morning and after work,It will idle for 10 sec. then die. It runs fine after that,can't any leak or smell any fuel. what could it be?

I just relocated my batteries to the truck bed. when I was removing the battery tray the vacuum line came off and a fair amount of oil came out. I know last winter when it was -40 degrees I would set the cruise it take off like someone floored the pedal. This summer I have had no problem, is...

I just put a new steering shaft on my truck and I noticed that the steering column has side to side slop at the firewall. Are their bearings in there that can be replaced or do you have to replace the steering column?

I was wondering if anyone had any info. on where I might find some aftermarket air ride seats for my truck.

My FASS pump is only putting out 29 psi is there a way to turn up the pressure?

I was wondering if anyone has changed out their transfer case with an after market one? Mine is getting sloppy at 222,000 and was looking for something with an overdrive. Anyone know of such a unit that will bolt right up to my transmission? I'am looking for one to fit my1997 in my signature below.

I have 220,000 miles on my truck and it never used oil. the p-7100 had some messy oil leaks so I up graded my pump. I asked the shop if I needed to replace the lifter cover gaskets he said there not leaking. I use about a quart every 500 miles and don't know where it's going. What could it be?

I'am looking at putting a B-1 turbo on my truck and was wondering if I will still be able to use my PAC-exhaust brake? It looks like the exhaust brake is pretty close to the fire wall already with the stock turbo.