Search Results for Query: *

Is anybody or has anyone ran Industrial Injection reman injectors? Who has the best price on stock injectors for an 06? Thanks.

My 06 is getting rebuilt, If the budget allows what would be the better choice smarty jr or a cam? I currently have a bully dog, the one with Crazy Larry tune.

Looking at cams, how many people would use a reground cam? Any down sides? 2006 hpcr:confused:

I have an 06 cr that I might have to sleeve 3 cylinders on a rebuild, can the cylinders with the sleeves be bored to 20 over to match the good cylinders that dont need to be sleeved? Is anybody running 40 over pistons? Is anybody had to sleeve all 6 holes? The block is all std bore right now...

I am looking at rebuilding an 06 short block, only a stock rebuild. What pistons, rings and bearings are the majority of people using? Cummins or Mahle pistons and rings? Cummins or Clevite bearings? If anybody was going to do one upgrade out of an exhaust manifold, intake setup or a cam which...

I have a 06 that the engine is getting rebuilt in and I know they clear coated the block, but does anybody know the cummins part# or what they called the brown color on the oil pan and gear train cover?

I have an 06 3500 megacab drw at 4x4 that seems to consume oil. Does any body else have or seen this problem? At times my truck also smells of heavy oil vapor from the draft tube. ? The truck seems to run fine, no blue oil smoke from the tail pipe. How many people actually service the crankcase...

Has anybody uses a banks big head wastegate with a boost elbow, or is this a good idea? I think both items do the same thing.

I took my lift pump off today, pulled the push rod out and fuel came out of the push rod hole. Does this mean i have a bad pump? The rod fits tight. From bench pumping it in a bowl of diesel it seems not to leak, but to me it seems fuel should not come out that hole.

I was reading on high tech turbo's website that they have a turbo compressor side up grade they sale. It looks like for a wh1c it is a bolt on up grade. Has anybody bought or used one of these set ups? I see they also make a kit for the hx35 bUT you have to do some machine work. I WONDER IF THIS...

Does anybody know where i can find out what the micron rating #'s on fleetguard filters?

Does anybody have a 1996-98 12v engine serial # i could use for looking up parts?

HAS ANYBODY HAD OR HEARD OF THE FUEL HEATER WIRES BURNING/MELTING? I FOUND MY WIRE HARNESS BURNT AT THE TOP OF THE FUEL HEATER. DOES ANYBODY KNOW WHAT MIGHT CAUSE THIS?:confused:

I ONCE seen a thread on here that had the part #s for injectors, but can't find it. Does anybody remEber the part #'s for these injectors & dv's: 300's 315's 330's 191 dv's 181 dv's anybody running the 300's or 315's? Thanks for any help.

Today I decided that i was going to put a grease zerk in the steering column. The cold weather is make it a pain to steer until it warms up. The tools: #3 wire drill bit 1/4-28thread tap 1/4-28 zerk drill bit ground down flat on the tip I removed the column and drilled a hole in the...

Has anybody purchased any billet grille bumper inserts for trucks with fog lights, any ideas on where to look? It seems they are getting harder to find. If the grilles for fog lights are not avaliable i have thought about getting some for no fog lights and triming them down to fit. Does anybody...

Does anybody have a picture of a factory mounted steering stabilizer on the 98-99 steering setup, or they would take a pic and post? Thanks in advance.

I INSTALLED THE LOWER STEERING COLUM BUSHING FIX A MONTH AGO, IT IS STILL A LITTLE TIGHT. HAS ANYONE THOUGHT ABOUT PUTTING IN ON A LATHE AND TURNING A GROOVE IN THE CENTER OF THE INSIDE OF THE BUSHING AND THEN DRILLING A HOLE THROUGH THE COLUM AND THROUGH THE BUSHING AT THE SAME TIME. THEN...

I have a banks twin ram on my truck now but was thinking about going back to the stock manifold. It is such a pain to all ways remove it when something needs to be worked on. Would this be worth it? What kind of power are people making on the stocker? Is there any other type of manifold or are...

Did dodge ever make a rear sway bar kit for trucks that did not com with one?