Search Results for Query: *

Service Manual for '95 Ram Truck. It is in as new condition. It is in a large 3-ring binder. Asking $35. I can be contacted at 503-371-3402or emailed at -- email address removed -- Milton Aleshire

On a recent trip my windshield wipers went out. Luckily it was the last 45 minutes of the trip; however, it was raining hard and created a real safety issue. I had just stopped for a cup of coffee, and everything was working fine prior to that, although I did notice the wipers appeared to have a...

I'm in the process of ordering and installing an oil pressure sending unit. From the search I did it looks like I need a specialized socket for the job. If the unit is the same size for a '95 as it is for a '98, I've read that the socket is a 32mm deep socket. Other places it is just referred to...

Currently stranded in Mesquite, NV for 5 days. Transmission ate itself up. I'm replacing it, but need to put in a new check valve in the cooler line as it appears that was the cause of the failure. It's located in a transmission cooler line. I've heard it called a check valve, a ball valve, a...

I'm about 1200 miles from home pulling a heavy trailer. I just noticed, after dropping the trailer and going for fuel, that when I accelerate quickly that I get a roar from the engine an increase in rpm's but not extra torque or acceleration. It feels like the TC is slipping. This happens both...

My power seat just puked, and I don't have a clue about where to start. I was planning on leaving town on Monday, but that won't happen now. Unfortunately, I had the seat moved all the way forward to get to something in the back seat. I'm 6'1" and can hardly wedge myself between the seat and...

My brother-in-law has a stock 2001 with a manual transmission. The clutch is not disengaging when the pedal is pushed in. I'm wondering if this year truck has a hydraulic clutch, and if so, is it a sealed unit, or can you add fluid? Is this a symptom of something simple (needing fluid or an...

My brother-in-law has a stock 2001 with a manual transmission. When the clutch pedal is pushed in, the clutch is not disengaging, so he cannot start it, shift gears, or come to a stop without killing the engine. I'm wondering if this year truck has a hydraulic clutch, and if so, is it a sealed...

I'm trying to install an AFE air intake kit on my '95. They supply a new duct tube with the kit. That tube exits the filter box from the rear engine side of the filter box. Everything was going smoothly until I tried to connect the tube to the filter box. There is not enough clearance between...

Does anyone have information or experience about the use of tractor transmission/hydraulic oil in our transmissions. I found very little in searching the subject. What I have heard is that the use of this fluid works well and helps keep transmission fluid temps down. Also, that it is designed to...

Are any TDR members still fabricating BHAF Heat Shields for sale? Or, does anyone know of a supplier for them. I've searched the forum and only come upon the plans for one, but I don't have the tools for fabrication. Any info would be appreciated. Skip

In doing a search in the archives I noticed that a TDR member produces a kit that allows the use of low range without locking in the front hubs on a 4x4. I'd like to do this to be able to back up a heavy RV without toasting up the transmission fluid temperature. I'm also wondering if some sort...

I'm having problems with the 20amp fuse for the A/C clutch blowing. That fuse is located in the PCM box, and also powers the horn. The circuit handles the horn OK, but the fuse blows when the A/C is turned on. If the relay for the A/C clutch were bad it doesn't seem like it would be blowing the...

I have a problem with the ABS light on my '95. At first the ABS light would come on during the diganostics at startup. It started staying on a little longer than I thought it should after startup, but would go out and stay off after I started driving. Now it has started to come on and stay on...

I'm the third owner of a '95 CTD that has a number of mods that the PO could not identify. It's been a sorting out process. The last part of the puzzle is the turbo. The motor has a 215 pump with other mods, and produces 35# of boost without much problem. I'm fairly certain that the turbo is not...

A couple days ago I contacted Robin, at Geno's Garage, with a question about a part. The question was whether the tapped banjo fitting advertised for a fuel pressure gauge on a '981/2-2007 might also work on a '94-'98 where the banjo fitting connects the fuel supply to the injector pump. Robin...

About a month ago I read a post regarding an Amsoil BHAF that had a 4" fitting on the end. A part number was given (not the 4510 filter) which I wrote down and then forgot where I wrote it down. I cannot seem to find it on the Amsoil site which seems pretty hard to navigate. Can anyone help...

I purchased my CTD about 90 days ago. I'm the third owner, and still trying to figure out some of the mods that have been made. Joe G has been a great help with this. The PO doesn't really know a thing, but with help I've been able to figure out a few things using maintenance logs from the first...

If anyone out there is using an Amsoil AE filter I'd like to know how they compare to the K&N filter in the stock intake box. I'm especially interested in which provides better air flow. At my last oil analysis I had an elevated level of silicates and assume that is due to sucking in dust/dirt...

Is Jacobs now making an exhaust brake for the second generation Cummins with the auto transmisssion?