Search Results for Query: *

I'd like to borrow an engine oil dip stick for about 3 hrs 98 12v engine mine broke off the handle and slid down the tube the SMOG referee won't pass my truck without the dipstick in place (long story) I have one on order at Geno's but is backordered and not sure when it will come...

Darn oil dipstick broke, tried pliers then magnet but it went whoosh--down the tube and out of sight. Long story, but I can't get my truck registered without the dipstick fixed--they say they gotta check the oil before doing the smog test--(its a referee station, so I can't just go somewhere...

Is there a trick to make hose easier to remove? Installing 1/4" hose onto barb, once its on it is NOT coming off Its on my boost elbow off my AFC, so I KNOW I'll be taking it off, prolly soon What can I put on to make it easier to take off? I'll be using a clamp and its very sticky...

I'm trouble shootiing a low boost, low power no smoke issue I/m looking for a leak, I suspect the AFC diaphragm is the problem or at least part of it I saw this post--is this safe to try? 'You can test it by taking the AFC off. Cover up the hole to keep oil from flying out of it and go...

error duplicate thread errir duplicate thread

98 12v 2500 4x4 215 engine due to poor power performance despite mods, I noted a little bit of fraying around the diaphragm bolt hole figure I'll replace it My local Cummins dealer couldn't pull up any specifics about my AFC, only the body module Got the # or please direct me where...

AFC cover on the bench now--Questions! thanks Got the AFC housing off--could use some real time help! Installing my #11 plate (off ebay) also have a springs I bought used but no directions to install those putting off the 3gsk for now, don't want to get in that far SO. . --The plate...

I made a mistake, ordered vulcan big line kit for my 12valve my thought was that the fittings would make it easy to add my fuel gauge and just generally easy, know I don't need them for the hp already cut into my overflow line on the fuel filter intake, so I"m kind of committed. ...

So recently I did a lot of work on my truck during the KDP and PS/Vac pump repairs. Now I'm wondering how long it would be before I can relax and feel comfortable with my work. I know I got the kdp/ps/vac done right I replaced the radiator hoses, removed and reattached the intercooler...

Did I ruin my starter? I accidentally pulled out the starter solenoid rubber plug , where the little brown wire to the solenoid attaches. I noticed the inside of the plug has a copper wire that was spiraled, at first I thought it was like that but now I realize the copper wire probably...

Replaced fuel lines front end of truck 98 12v ended up with a sharp bend (bent) hose between prefilter and banjo bolt on pump I was using 3/8" marine hose for supply line, prefilter barb and banjo barb on pump turned out it was 1/2"! I kept whining about how hard it was to get my 3/8"...

98 12v Can you point me to a Diagram or detailed instructions for where VP/PS hoses hook up to? took it apart a while ago, 2 PS pumps returned for defects and waiting for 3rd Now I'm not sure about the hook up! Also did my KDP, can I reassemble everything in front end except the drive...

****, I'm killing my KDP Everything going GREAT, until-- I tabbed the dowel pin, but broke the 10mm bolt that holds the pin washer I think what happened was i put the drop of red threadlocker on the 10mm bolt that holds the tab, tightened to feel, then a friend came by and was talking to...

I know there's a thread somewhere, but I'm kinda in a hurry I'm switching my 98 regular mirrors for manual towing mirrors I bought used. The screws are in the same place, but they are larger and longer I heard there is a bracket that I need to buy to install these correctly. Does...

I have a 98 12v 5speed manual trans, 4x4 4. 10 I use it for towing, 10K max , don't see more than that in my future... New to me, I think it is bone stock... I have a K&N FIPK air filter waiting to install... Of course I want to do gauges, then? I guess I am worried about doing a...