Search Results for Query: *

I have a 04 cummins with a miss. I took it to a mechanic who killed each cylinder one at a time, and said the #6 injector was bad. I sent the injector off and it tested good. That guy said it may be in the wiring, but I'm not getting any codes. Is there a way to test the wiring that runs to...

Any suggestions on filling the fuel gauge tubing with antifreeze. I got a set of isspro gauges and am about to install. Pyro, boost, and fuel.

I have a 95 2wd 3500 and am wanting to replace the front coil springs. I know on the 4wd springs it goes by tag number, but I can't find any tags on my springs. Are there supposed to be tag numbers? Does anybody have a source for these springs? Not sure if I can still get them from Dodge.

I just put a new head gasket on my 95, along with some new ddp injectors. I also put a rapid flow air filter on it at the same time. When I cranked it, it now makes a funny noise, hard to describe with words though. Kind of a lopeing noise, "whoo, whoo, whoo" type noise. I hear it best when I...

On a 2004 cummins, do they come from the factory with sleeves? Also, how much cylinder scoring can you live with, or at least can your motor live with? Can you hoane some scoring out and be ok?

anybody using the cfm+ intake? [I] was planning on getting an ATS but found the cfm online. I wonder if the composite material will hold up as well as the ats?

I got a reman head from cummins because my head was cracked. It is not stamped to tell me how much was milled off. So I used a mic to measure the thickness from the mounting surface to the head bolt surface on my head and the reman. It was about 0. 003 difference. Is this an accurate way to...

I broke the factory plug for my coolant sending unit, called dodge parts. The plug is unavailable. Anybody know where i can get one?

Is the twin ram intake already tapped for a boost gauge, or does that have to be done manually?

I am replacing my head gasket on my 95 and was wondering what kind of sealant is the orange stuff on the threads on some of the bolts I removed? Ex the intake manifold bolts, and the temperature sending unit. Also do any of the head bolts need sealed on do the go in dry?

I am putting a set of ARP studs on my truck and need a set of milled pedestals. Wondering where I can get some. I could take them to a shop if anyone knows a shop around Dallas that knows what they are doing.

I'm getting ready to add some power to my 95, probably some DDP stg II with a new fuel plate. I am shooting for about 300 hp. I've been reading alot of threads about turbos and it sounds like I may need to upgrade. I don't know much about turbos, so I'm looking for suggestions on what I need if...

I've been reading many threads about injectors and fuel plates, but am still a little confused. I am looking to make about 300 hp on my 95, or maybe a little more. I was going to get some stage 2 ddp's, but cannot figure out which plate I should get. I would like to improve my milage with normal...

I need a good machine shop around dallas that can mill my rocker pedestals and resurface my head. Anybody know a dependable shop?

I've got a friend who is taking used motor oil, mixing it with gasoline at 30% to get the viscosity the same as diesel. Then he filters the mixture to 1 micron, and fills his tank up on his cummins. He has been doing this for close to a year without problem. Now he's using it in a 6. 0 ford. It...

I'm putting a head gasket on my 95 truck, and am trying to figure out what is in the cummins upper engine kit. I've used these kind of kits on gas motors and have wasted many things in the kit. I'm having a valve job done at the shop, so I won't need that stuff if its in the kit. I'm trying to...

I'm looking for a good bottoming tap for my block before I put my studs in. I'm pulling the head, so that won't be an issue.

The directions with ARP studes say to torque loosen and retorque 3 times. The directions don't say anything about retorquing after several heat and cool cycles. But, so many people are saying you need to retorque often. Is it really necessary?

I have a leaky head gasket on my 95 cummins and have been trying to decide what mods I need to do. I don't plan to get to radical with this truck. I plan to put some 50 or 75 horse DDP injectors and get a new fuel plate, hoping for 250 or 300 horse. Do I need head studs or will a set of new...

I'm looking for a timing light that I can use to check the timing on my 12v. Any suggestions on a good brand and model.