Search Results for Query: *

where is the connector for the apps located? I am trying to do the suncoast converter rewire to stop the lock and unlock thing on my truck. thanks

my a/c is taking a little longer to get cold this summer. I got a can of coolent to charge it up . I hooked up the can and before i added anything the pressure was already in the red. Is there a problem with my pump. I do get cold air but it takes a little longer then I think it should. Also...

I installed a airtex fuel pump, relocated down on frame less then a year ago. Up untill now I have been vary happy. turn the key wait to start I have 15 psi it drops down before starting. this is normal I know that. last week I noticed that the pressure was staing up in the teens and not...

I was looking at these injectors from pensocola diesel. for 215$ set of 6 new injectors. sounds good anyone tried them?

Well I change the stock steering box out with a reman. This went about as good as it could. Everything went back together nice, I filled the res. with fluid, turned the wheel back and forth many times with the front wheels off the ground. 'this was not easy" I checked to make sure fluid did not...

I am going to replace my steering box tonight. Does anyone have any thoughts to make this job go nice and easy. it does not look that bad. I am just going with a stock lifetime unit from the parts store. $165. 00 thanks

:mad: Does anyone know of someone in MN that does alignments on dodge front ends. THE DEALERSHIPS SUCK. I am looking for the small guy that has done hundreds of these truck, and knows there down falls in the front ends. Everthing looks to be tight but it is still wondering going down the road...

My carter lift pump that I move to the frame gave out. I have the big line kit going back up the the engine and I was getting about 13 psi at idle. (this set up lasted about 1. 5 years) It would drop down to 7-9 when I got into it hard. the other day I started it up and happened to look down and...

I think I am going to sell my 01 dodge and go to a 06 or 07 mega cab. I need more room! Right now my truck has the goerend stage 3 trans (love it) I think I would like to go to the 6 speed man. I don't want to go thru the auto thing again. What do people think about the newer auto. I pull a skid...

right now I have my stock lift pump relocated on my frame. This is good! But i am getting about 10 to 12 psi at idle under heavy pedal it will dropwell into single digits, not below 5 but lower then i would like. What pressure can I expect with the fass ddrp. Will I be happy? Thanks

Somtimes when I first hit the brakes after starting the truck they grab real hard like you just slammed the brakes on. I don't get any code untill it is really cold out in the winter (mn), I will get the abs brake light to come on. during this time I don't think the abs is working. It seems to...

This seems to be the one area, that I have left to get the slop out of. With the truck off I can grab hold of the steering shaft and rotate it alot more then i think it should. the truck has about 155,000. I can feel the slop going down the road. What is a good replacement box. I can get a good...

I have noticed a little lazyness in response just off of idle. It starts good and runs good, but when i am just getting on the throttle it seems a little down on power. There is no codes that I can see. The other day I turned around on a street and when I rolled on the throttle I got some black...

Well I got my front end all tightened up. New track bar, lukes link on pitman arm new left wheel bearing. So it was time to get new tires 265-75-16 10ply. now it seems to wander a little more at speed then before. ???? Well i brought it in to have it aligned, this seemed to help a little. this...

The ottomind box I have in my 01 auto defuels a little when its shifting. This can be felt when I am getting on it hard (unloaded). This , if I remember right is part of the system for the ottomind. can I get by this by putting in a boost fooler inline with the map. the ottomind is hooked up...

What size nut is holding the bearing hub on my 2001 4wd 4 wabs. And what is the magic word to get that f-ing thing off? I tried a 3ft bar and had it soaked for over a week. The socket I have is a little big but it was not slipping. Help!!! Thanks#@$%!

I would like to get a little more boost out of my stock turbo. its an 01 auto. What can be done?

I had a freind do the trouble code check, 3 on and 3 off for his 2001 3/4 ram. He got back ppcu, p1693, pdone, pecu, p0234, pdone. what are these codes ?

I am getting ready to change out the hub/bearing on my 01 3/4 4wd 4 wheel abs. what size socket is the big nut, and bolts holding the hub on? Is there anything else I need?

I pulled a good load of wood up north. The next morning I could see that some oil had come out of the seel where the drive shaft comes into the pumpkin. It had sprayed off the spinning drive shaft and went all over. How hard is it to replace this seel? the oil level was still ok. Thanks