Search Results for Query: *

Hi guys, does anyone know how to remove the igniter from an atwood 12v gas heater model 8531-iv-dclp? Without removing the entire unit. Thanks for any help provided

Hi all i have a 2001 2500 with 3. 42 factory gears, my question is im hauling a 28ft. wilderness super slider, 9k fully loaded are my gears too high for towing? I find even with the Edge, i have to lift on grades, due to high EGTs. A penny for your thoughts Thanks guys and gals

Hi guys, having a little problem with my central heating in my 5er. You can here it lite, has a strong flame, them the flame turns off, then back on in about 30 seconds, and it repeats this process about 5 times, then just continue to blow cold air. When i can here it light, i can feel the air...

Hey everyone, i have a 2000 wilderness 28ft superslide, and while towing on relatively flat ground my EGT is about 1000f, trans 165f, and water temp normal around 190f on guage, oh also, a constant 10psi boost all this around 60 mph, am i good? Thanks guys Oh 5th wheel 9000 gvwr.

Hey guys, the interior lights in my superslide on my 28ft wilderness, stopped working, no fuses are blown. Am i missing a plug somewhere? Any help would be appreciated. Thanks Eric

Hi all, just wondering if anyone has tried these two together, and if one is better than the other. i had edge module hooked up, then got a great deal on a used superchips max tuner 3705, 80 hp, and 180 tq, on hi perf. setting. The edge ez didn't seem to come on until drive and overdrive, it...

Hi guys just wondering, if the superchips max tuner can be used with the edge ez. i disconnected the edge to try the superchips tuner, and the power is about the same on high performance, but i notice that the superchips is smoother than the edge throughout the rpm range, but was wondering if...

Hey guys getting ready for mech. guage install, got from vulcan, didnt come with syringe like it said, anybody know where to mount isolator, didnt have pictures. Thanks

Hi guys, does anyone know where to get vp44 check or relief valve online? And crush washers? Thought i would change, everything is working ok, except takes awile for it to seat i think cause pressure is around 10 psi until about 10-20 miles of driving, then comes up. Idle is always 14-15 psi...

Hi guys, just wondering if the afe torque tube will work with stock air box, just wondering if anyone has tried. , It states replaces stock tube, but then next sentence it states its for afe stage 1 air filters, not stock air box. Im using TSM cold air, so i want to keep stock box. Thx in...

Hey guys, just a quick question, just wondering if the resonator on my early 2001 cummins 2500 is a cat type, or is it for muffling the exhaust? It is only about 12 inches long if that, and would it be safe to remove? Thanks for your time

does anyone know how much pressure the DDRP FASS pump puts out?, i know its 33% more volume, but doesnt list pressure. Thanks in advance

Hi guys, got a question, my lift pump fuel pressure isn't always the same, i put the vulcan big line kit from filter to vpump, i installed a fuel pr. guage, and the pressure was 15 at idle, and wouldnt go below 5 at hard throttle, i tried to install the genos extended line so sender would not...

Hey guys is there any universal inline fuel pumps that can work on 2001 24v? Some say they put after market gas pumps, and it raises pressure to 40-45psi. How much pressure can the VP44 handle without a problem? And if it can handle it why didn't dodge supply a lift pump that puts out that...

Hi everyone, just wondering if there is a smooth bore intake hose for the factory 2001 air cleaner, i have installed the TSM cowl induction in place of my k&N cold air intake. ANy help would be greayly appreciated. Eric

Hi guys, im considering installing a ddrp fass pump with frame mount, my truck is a 2001, and i noticed the fuel line under the truck is not rubber all the way back, when you guys do frame mounts whether airdog, fass etc. do you cut into the metal line, or do you mount foward where line is still...

Hey just wondering, i had a 97 powerstroke diesel, and from summit i was able to buy a torque converter lock switch made by B&M that with a flick of a toggle switch i was able to lock the converter through a tapped computer wire going to the lock-up solenoid, and keep the converter locked while...

I bought a fuel pressure guage, and was wondering if anyone knew where i could buy a adapter fitting to screw onto my injection pump, the sender came with 1/8 inch npt male, need to adapt to schrader on injection pump. Napa was closed, and i tried Kragen and auto zone with no luck. The latter...

Hey guys, i was at a truck stop the other day refueling, and this guy asked what kind of fuel additive i use, i had some redline fuel treatment. The guy suggested acetone, he had the a 99 cummins with 225k miles, and been using since 100k. He stated not only did it clean the system, but it...

I have a 2001 2500, and installed edge ez module, felt no power gain in any of the three positions, and called edge and they had me send back for repairs. Just wondering, if the buss connector they call data link connector, should be probed for power, or does the edge module just send data...