Search Results for Query: *

06 mega cab diesel passenger rear door wont unlock and the cab light wont come on with that door. Windshield wipers wont park, and torque converter locks up at idle. Is their a power train control module that controls all of that everything except wipers just started happening.

I'm having trouble with my 95 12v p pump. After starting fluid is used it start and runs great above 1000rpm anything under 900 it is sluggish till 1100 then snappy 18° of advance on the pump. High pressure eletric pump feeding lift pump, heater eliminated checked all return lines and fittings...

A friend last year put a new front clip on my 98 12v and forgot he put just water in the new radiator it froze and broke the oilcooler cover we replaced that but if you fill it with water it goes into the pan is there any internal freeze plugs that could pop out and allow water in the oil?

I had a friend work on my 98 12v he forgot he topped it off with water and set it out side last winter got it running this summer oil spraying from underneath it had frozen and broke the oil filter cover over the oil cooler bought a new one and a gasket set filled it with water ,pan is full of...

I am looking for chain, both gears and the big shift collar (2 and 4wheel shifter) for an 98, 1 ton, 5 speed, 421 dhd transfer case. Brian 308-458-2411.

i have a 98 ram 3/4 ton quad cab the relay is welded shut and the lights are staying on i have to pull the fuse out to turn them off i bought a new relay and have looked for about 2 hours and still cant find it looked under dash around steering columb, in fuse panel in fuse relay center under...

my 98 also wont shift out of first in low range it originally came w/ a np241 dhd but it broke the front u-joint and broke the tranfercase and someone put in a 241dld well the front joint broke again and took out the dld and i put a new np241dhd back in but i just noticed it wont shift anyone...

i have a dana 70 locker but it doesnt have the reluctor wheel is there any other place to pickup the speedo signal?

is a tps sensor avallible from cummins or is that a chrysler part only? or is there a better place to get one? rod

i have a 98 12valve 47re trans i have cleaned the throttle position sensor i think it helped for a couple of days but now it locks up then with in 1 to two seconds it unlocks but if i give it more throttle it stays locked,is it my throttle position sensor or my alternator giving it noise? do i...

bought new horns found old one on truck tested them they were burned out and so was the fuse. changed fuse installed new horns , beeped horns they worked fine tried then a couple more times through the day they worked. midnight or shortly after just going to bed and i hear a horn honking go...

i posted under wont start and that was true but now it will start but wont shut off and the intercooler is not full and the solinoid is not hanging up it is something inside the injection pump can the fuel plate come lose and go the wrong way because it wasnt to go to 38-3900 rpm with out the...

i have a 98 12v stock injectors motor just rebuilt after 406,000 miles. two weeks ago ( it has been very cold here in des moines) i started the truck after i had been inside getting parts it ran then died i started it again and it died i thought maybe water in the filter drained it then pumped...

my wait to start light comes on like it should when it goes out after 30 sec. i start it then the wait light statrs flashing even if i shut off engine and restart just keeps on flashing any ideas? rod

rebuildt enine while it was out put a shift in from patc and their soleinoid replacement kit that is a billet shift valve body that uses gm soleinoids now it will only go in reverse and 1st and may be lock up im not sure if it is just slighly overrunng and you down shif from d to first you feel...

who has the cheapest best torque converter for towing mostly stock truck 5. 9 12v 98 47re? rod

what is the best way to pull the motor it is a 4x4 is it nessesary to lift the cab?

how big does cummins supply their oversized pistons for a 98 12v does anyone know? rod

who has the best aftermarket rebuild kits for a 98 12v? who has ones to stay away from? rod