Search Results for Query: *

06 cummins will not start after u shut it off when it is warmed up truck is stock no mods at all. Were should i start

last night was pulling flatbed trailer with 4 combine tire on it down the very soft gravel road truck shifted into overdrive and exhaust temp climbed from 600 to 900 very quickly pushed overdrive off and temps went back down to 600 wasn't in the throttle very much either boost went from 10 down...

just got an 89 cummins and thinking about putting the 5 speed out of that truck and putting it in the 00 cummins any thoughts and suggestions

truck shifts late, i can make it shift sooner if i let of the pedal

trans will not shift out of first gear, after adjusting bands and cleaning governor pressure solenoid

want opinions on a smoke switch becuase im thinking about putting one in to **** people of.

ocasionaly truck dies when shifting from drive to reverse or vise versa seems worse when cold but starts right up and works fine this is on the 2000 ive got 15 psi of fuel pressure

What is all this talk about T-Steering. What is it

the fuel shut off solenoid is not working, replaced solenoid and relay, still no start, i've got 12 volts going in the relay but only 8 going out took ground wire for relay and went straight to the battery still the same thing, if i power up the white wire on the solenoid it will come up so the...

just finished putting on BD steering box stiffener and 3rd gen adjustable trak bar on my 96 steering doesnt wonder as bad and hopfuly no more death wobble i am pleased with the instalation cause one person can do it and it is realy simple the only bad thing is that i had to wait 2 months to get...

My 2000 when i start the engine it will surge for 3 sexonds then all is good and it only does it when you start the engine warm or cold it has a FASS pump on it any ideas

I figured out the misfire i had. It turns out it wasn't anything to do with the injectors or the pump. The rocker arm bolt came loose and the intake valve wishbone on cylinder # 4 fell out. I already had a set of BD injectors, no use it sending them back so i also put them in now the truck runs...

thinking of putting bd 50 horse injectors in will it affect my idle speed and are bd injectors a good brand

i dont like the look of the mirrors on my 97 2500. Will the mirrors on the 98-02's fit with out any body modifications, i can handle electrical mods

any one get tired of looking at that ugly licence plate holder, i did. but i fixed it with a piece of diamond tread aluminum looks a hundred times better. Also moved the trailer plug to the new plate holder cause the engineers in their infinate wisdom didnt think of the guys that drive alot of...

my 96 makes a clunking noise in transmission when i step on the throttle in any gear. It has been doing it since i bought the truck, it has 250,000 miles on it i got it at 145,000

my 00 2500 is misfiring at all time under load and idleing with the truck running we broke each injector loose and all changed the engine idle but #4 and there was pessure at the line;any sugestions

anyone got any sugestions to get my 12 valve to blow a hole lot of smoke!!!!!!!!!!!!! just got the truck, dont now about any power mods that it has but it runs very well, it pumps 30 lbs of boost and take off like a bat out of hell. I am also concerned a bit about the EGT's, some days it will...