Search Results for Query: *

I have just completed overhauling my 96 12v at 389K. New brgs, rings, gaskets, seals, head worked, new valve springs, new HD clutch, DDP stage 1 injectors, etc..... At start up I was waiting on oil pressure to come up before I allowed fuel to the injectors. Allowing the starter only 15 sec...

I am in desperate need of one rod and one main bolt for a 96 12v. I tore it down and bought new head bolts, but had no idea the rod or main bolts would stretch when retorquing to spsc. That is all I lack before I can button up the engine and reinstall it. 96 2500 4X2 5sp stock 389K mi...

I am planning on replacing my head gasket on my 96 12v. (Due to excess crankcase pressure blowing oil out the vent above 8psi boost. It uses no oil as long as I stay below that boost pressure. I can't gripe at 400K. ) Replacing injectors and doing a valve job while I've got the head off. I...

My 96 12v stock engine, 4sp, with 215,000 on a new short block ( all other engine compoents have 385,000 on them. Block replaced after a quick lube station left the oil plug loose. ) has taken to blowing oil out the breather tube when the boost exceeds 10psi. This is to the tune of 2 gallons in...

My cruise servo has sprung a leak and will not hold. Does anyone know where I might find a replacement? J Jones 96, 4x2, 3. 54, 389K, EGT & Boost gages. KDP locked down, Fresh air intake, otherwise stock

My 96 2500 4x2 std has developed a major leak at the lower front of the lifter cover, right behind the injector pump. I consider it major to the tune of 2 gallons in 60 miles. It took a major washing of the engine compartment to locate it. Has anyone experienced this and know of a easy cure...

Has anyone ever drilled an 1 1/2" inspection hole in the bell housing to inspect the throwout bearing / clutch? If so, what is the best location to locate the hole? I am contemplating doing this with a hole saw and then plating it a 1/4" plate larger than the hole. Drill and tap the plate in...

I am looking to find a way to get the factory 'Line Sheet' for my 96 2500 4x2 I have checked with the local Dodge dealer, and pulled it up to look up the differental numbers, but he would not let me have a copy. Is there any other way to get a copy? Also, The "Air Bag" light is on and I have...