Search Results for Query: *

Just replaced the head gasket; had the head cleaned, magnafluxed, and milled. Used ARP head studs torqued to 135 ft/lbs and all OEM gaskets to include exhaust, intake, crossover tubes and injector seals. Valves were adjusted to .010/.020. It started right up, idled smooth and drove...

I have the 8N with the back-up cam but I also have a cam on the back of my 5er; I use it to line up with the boat when I tandem tow. Id like to utilize the 5er cam again so I was thinking if I tie into the video feeds on the back of the display, I should be able to use a switch to toggle the...

I noticed when I hook up to the 5er, tow/haul and EB on, the trans will go from 2nd to 4th bypassing 3rd gear. It starts to lug pretty bad at that point so i sink my foot deeper to get it to downshift... anyone experience this?

This is the second time it has gone bad in less than a year... about to order my 3rd one. What causes the solenoid to go out? I lose 1st gear when it happens, the only way i get it is by coming to a complete stop, put it in neutral, wait for a few seconds for the pressure to bleed off, then...

John, as the beta tester for this, whats the status of this program going live with SMARTY owners like myself being able to use it?

Anyone running one? Is the cost to benefit worthwhile on the 48RE? Have trans mods in my sig but still annoyed by the upshifts and downshifts between 2/3 and sometimes 3/4. I have heard the enhancer really does a good job spacing the shifts out on this trans whether it be DTT, Suncoast...

My previous thread of excessive EGT's is now a broken link for some reason... maybe the moderator is trying to tell me something:rolleyes: Cerb's theory is that my turbo I had ED size for me based on my current set-up and daily use of the truck, is too big for the injectors and am not getting...

A bit baffled. Currently on a trip; in yellowstone with a destination of Glacier Mt. No matter what Smarty CaTcher# I use or adjustment option, the truck will always see 1400 - 1450* EGT while pulling a grade w/13K# in tow; this is even when set to stock tune. When tuned to stock, even pulling...

Are the new SMARTY files dated 16 May designed for the new UDC coming soon? I loaded it on to my S06 POD and the option is no longer there to adjust timing/RP/TM; upload a CaTcher and thats it... . I wonder because the file name has a "U" in it where in the past it was usully an "A"

TC wont lock up with the mystery switch anymore, and worse, when the EB engages it has almost no effect on braking the speed; It will engage, drop the RPMs and open back up all within 2 seconds. With the TC unlocked the EB is worthless which is what leads me to belive this is the issue. So...

Some of you may remember my oil pressure issue I was having at start-up. Since I installed my manual OP gauge, It has only happened 2x but each time only lasted about 2 seconds. Building on that issue... I just changed my oil and to my surprise, what is normally a somewhat messy filter...

Just installed the BD OD Lockout. After engaging the lockout it stayed in 3rd gear... cant even downshift w/the range selector into 2nd or 1st. I have a PB installed, do they not get along? The PB uses the #13 pin just as the OD lockout does, should I have connected the BD module on the trans...

After my fiasco with my last injector/nozzlecombo i put a NEW set of Bosch injectors in with the II 60 hp dragon fly's. All was well for the past week until yesterday when I fired it up and got the same rattle i was before. It threw both the p0088 and p0251 codes. I shut it off immediately...

Does Ram make a 4th gen in a Sport model? I'vebeen looking everywhen but cant find one; I prefer the painted bumpers over chrome.

So I was completing my read of this quarters issue of TDR and I came across "A look at injectors" in the From the shop floor column. It struck my interesest because at this very moment my truck is sitting in the driveway with 6 empty hole where the injectors would otherwise fill. I have sent...

WHat are the benefits of the Governor Pressure Conversion Upgrade Kit (Part No. 618-GK) for the 48RE and is the cost to benefit worthwhile? What types of problems are we solving by installing it?

After all the posts I have put up and no help, I continued on with my testing. I found on Geno's garage an easy test for the FCA, remove it and hook up 12V from the battery; if it engages, its good. I performed this test after a P0251 code and it was good. I drained the filters of any water...

History: Installed new DDP 50 nozzles last weekend set smarty to sw3 TQ2 RP2 TM4 and it ran great on the 300 mile trip to where I sit now. Yesterday, I restored the ECM to stock and let my buddy try the smarty. Once complete, we retored his back to stock and I downloaded the same tune back...

History: Installed new 50 nozzles last weekend set smarty to sw3 TQ2 RP2 TM4 and it ran great on the 300 mile trip to where I sit now. Yesterday, I restored the ECM to stock and let my buddy try the smarty. Once complete, we retored his back to stock and I downloaded the same tune back into...

What is the estimated time to install injector nozzles?