Search Results for Query: *

  • Users: KyleHart
  • Content: Threads
  • Order by date
Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
  1. K

    P0341 Help!

    I had p0341 cam shaft position sensor code. History: truck has 375,000 miles but has always been a strong running truck and well maintained. 2006 5.9l. This winter with snow on the ground I was helping my son move and truck would start to stumble but would pump throttle and it would come out...
  2. K

    cam shaft wiring diagram

    I had a code for cam shaft position sensor failure. when trouble shooting the wiring I have found that the wires in the plug do not match the wiring diagram I have from Alldatadiy Does anyone happen to have the wiring diagram showing the Cam Shaft sensor and C1 and C2 at ECM they could share?
  3. K

    Will truck run with bad camshaft position sensor?

    2006 Ram 2500 megacab has 400,000 miles been well maintained. Dont drive on regualr basis due to increased reliability issues. Drove it to and from work approx 30 miles each way during recent heavy snows in Arkansas >12in. Next day helping son move would start running very rough but would...
  4. K

    Good source for transmission parts and advice?

    2006 ram 2500 megacab 360,000 miles. Located in central ArkansasTruck would not shift into park. I dropped the pan and valve body and found front/second gear band had come apart and lug from adjusting bolt to front shifter band was jammed in shift comb. Any recommendations on transmission...
  5. K

    No boost pressure, no power, no smoke, bad turbo?

    Cold weather destroyed battery, after getting replacemnt battery notice trans not shifting then noticed no boost pressure and no power. I presume turbo is failed. How do i Verify? 2006 Ram 2500 350k trouble free miles! Last 5k miles replaced fuel injectors BBD stg 1.1, replaced lift pump...
  6. K

    While changing fuel injectors nut came loose from valve cover gasket and naturally fell down along.

    While changing fuel injectors nut came loose from valve cover gasket and naturally fell down along push rod. Will the nut continue into oil pan and if not where does it go? And what do i do? Any help is appreciated. 2006 ram 2500 4wd. Thank you!
  7. K

    Cel and grid heater flashing truck no start help please?

    2006 2500 5.9 no start cel and grid heater light flash while trying to start. No stored codes. 360,000 miles. Hasnt been driving much since december did just refill fuel tank after first drive in a couple of months.
  8. K

    maintenance

    I would like to thank all with info posted. I used info found in these forums to change oil and transmission filters and fluids and adjust bands on my '06 mega cab. Thanks again.
Back
Top