Search Results for Query: *

I have torqued my lug nuts to 155 Ft lbs per my Dodge service manual on my 2005 3500 DRW truck flat nuts but I looked at the lug nuts to day and I can see stamp into the end of the lug nuts torque to 140 Ft lbs . I would like to know if some one out there knows the right torque . Is it 140 Ft...

Has anyone ever put on there truck a add on transmission cooler. The kit has you cut the return cooling line with a tube cutter and then you put on a compression fitting onto the aluminum cooling tube to connect the hoses to and from the add on cooler. My Question is has anyone had trouble with...

I was going to install my new Mag-Hytec DD pan today and found the filter drop down extension kit has no gasket to go between the filter drop down block and the transmission the new filter has a gasket on it. is the filter drop down block just mounted metal to metal . Has anyone put this pan on...

I got a add on transmission cooler with temp switch and fan. The directions tells me to mount the cooler under the pickup bed and take the hot line out of the transmission and put it into the new fan cooler then into the antifreeze cooler then to the front air cooler then back into the...

I am installing a 16 PSI Wastach fuel gauge on a 05 I have a banjo adapter from Geno's garage I am going to put the banjo adapter on to the low PSI in on the high PSI pump. I would like to know if it is ok to mount the sending unit for fuel gauge right to the pump on the engine on the low PSI in...

I have a 3 gauge mount at top of my wind sheild I do not like so I was thinking of moving the 3 gauges to a triple piller mount on my 2005 truck which my piller has a handle on it. So how hard is it to change to the new triple gauge piller mount do I have mod the piller like sawing off the...

What should the max boost be on a good running stock 2005 Auto 3500 3. 73 diff. loaded and unloaded.

I am going to buy a low PSI fuel gauge for my 2005 Dodge Turbo Diesel and I need to know the best gauge that will be trouble free and vary accurate. I was thinking of a mechanical gauge with a isolator Isspro 0 to 30 PSI . Want to know the Pro's and Con's on Electric and Mechanical gauges and...

I have a 05 3500 with automatic with 76000 miles on it. When I am accelerating and the RPM gets to about 2700 and up to 3000 I feel vibration or could be a miss fire that feels like a vibration. Up to 2700 RPM the motor runs and idles good and I see no smoke above 2700 RPM or below that RPM and...