Search Results for Query: *

  • Users: MDSlover
  • Content: Threads
  • Order by date
Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
  1. M

    injector removal

    i have 08 dodge sitting at stop light check engine and lightning bolt came on now has steady miss cold it be bad injector if so how hard is it to replace
  2. M

    exhaust

    been looking at 2008 1ton 4x4 dually . ive had 2001 5. 9 for 10 years now but need a 4 wd . why are there no programmers for 6. 7 banks dont even offer exhaust for it why cant you take all that mess off the exhaust that has to be restrictive . they tell me check engine light will come on . dont...
  3. M

    Engine/Transmission (1998.5 - 2002) exhaust

    looking at 2008 1 ton 6. 7 scares me im use to 5. 9 how hard is it to remove that exhaust it looks like a nightmare do you really need all those chambers it looks really restrictive nobody around here seems to know anything about a kit to fool engine so light wont come on what is best programmer...
  4. M

    Engine/Transmission (1998.5 - 2002) is it worth buying

    i have a chance to buy a 2005 1ton 4x4dually it has 244000 miles on it it belonged to a farm looks to be in good shape but that is a lot of miles what do i need to look for i know a lot of people get a lot more miles than that but i thoght i would ask someone that really knows it is also...
  5. M

    Engine/Transmission (1998.5 - 2002) power increase

    on the 2006 what are some of the things you can do to increase power someone has already put superchip flashpack on it is that ok or should i change it to edge or banks thanks for the help
  6. M

    Engine/Transmission (1998.5 - 2002) 2006 dodge truck intake

    is there a silencer ring and turbo baffle on 2006 dodge i ton if so how hard is it to remove also can you remove cat without any codes being set
  7. M

    Engine/Transmission (1998.5 - 2002) new truck purchase

    looking at 2006 1 ton do they have the same pump lift pump computer problems as the 2001 or has that been resolved is that a good engine any help would be appreciated
  8. M

    Engine/Transmission (1998.5 - 2002) alternator problem

    started truck up this morning alternator was charging right at 14 volts like it always does then slowly goes to discharge check gauge light comes on turn truck off re start now its charging again any ideas on what to look for
  9. M

    Engine/Transmission (1998.5 - 2002) scotty air systems

    does anyone have or know where you can get a scotty air systems air cleaner for a 2007 1ton dodge ijust found out they were out of business ive had one on my truck for 8 yrs and love it any information would be greatly appreciated
  10. M

    Engine/Transmission (1998.5 - 2002) stacking programmers

    would it make a difference in power if you stack the edge ez with superchip 3855 flashpaq will it hurt anything ihave guages so i can watch egt
  11. M

    Engine/Transmission (1998.5 - 2002) 53 block

    i can you tell if you have a 53 block and if you do what do i have to look forward to
  12. M

    Engine/Transmission (1998.5 - 2002) dead engine

    replaced cam sensor 2 weeks ago ,driving down interstate no warning engine instantly dies engine light is on ,will restart but only 400 rpm real shaky throttle is dead it acts like its not hooked to engine no throttle at all what should i do first it has 189000 miles it is 2001 6 speed
  13. M

    Engine/Transmission (1998.5 - 2002) surging

    Truck has 189,000 miles on it, lift pump was changed 1 year ago, cam sensor has been changed, surging has gotten gradually worse - especially when the weather is cold. It's almost like you are giving it throttle and letting off the throttle. At 70 mph, it's fine. No codes.
  14. M

    Engine/Transmission (1998.5 - 2002) when to change pump

    how will i know when to change the pump on my 2001 dodge truck how will it act
  15. M

    Engine/Transmission (1998.5 - 2002) cam and crank sensor

    on a 2001 dodge ho 6speed how do you change cam and crank sensors do you need special tools my tach stops working then check engine light comes on then it goes back to normal shows 1693 code
Back
Top