Search Results for Query: *

Front wheel bearing is dying. Factory part looks discontinued. Anybody make a good one? Front wheel bearing/ hub, 95, 3500, 2wd.

I troll craigslist and fix up old tools to put back into service. Recently found a 10" skill saw from the good old days. All aluminum body, weighs 30 pounds. Works great, leaks oil. I need to replace a gasket that i cant find. Anyone know where I can get a service manual or a good way to...

My indicator fuse lasts about 10 seconds before it blows and the turn signal light stays lit on the dash. Checked the bulds. Contacts are a little loose. The front indicators are staying on but not flashing. Rear are shutting off. Both rear indicators blow the fuse when left on. Im assuming...

Finally picked a new turbo after years on the backburner. I have the factory rambrake, and figured i might as well keep it, but wanted more oomph. I found a drop in unit that keeps the standard downpipe. Its a fenley 60/67/12 with a billet wheel. Wastegate is set at 38 by the builder. Its...

My 11 year old airdog died in december. I had it replaced with a new airdog 100 and larry b's full wiring replacement kit. The pump has always clicked on and off while operating, but now it drops the rpm by about 50 when it clicks off. How normal is this? It also (might be crazy) seems to be...

The idle started dropping at the lights and it dies after a few seconds. Cranked for 10 seconds and it came back to life. No loss of power. Drove it around for a while, everything felt normal and couldnt get it to die again. any ideas? It has an airdog 150 system. As far as i know fuel...

Im looking for information on a safe that I am considering buying. It is probably 15 years old. It came out of a jewelry store that closed. It is a TL-15 Tool resistant safe weighing approximately 3400 lb. (72 in tall) (40 in wide) (30 in deep). It looks like at least 1/2 in plate all the way...

Selling my 300winmag components if anyone is interested. Have about 140 winchester cases mostly once fired the rest new, and 70 remington cases all once fired, 3 die set RCBS full length sizer, neck sizer, and seat/crimp. Also selling the bullets that I cant use in the .308 most of the 200+...

Have a 95 DRW 2WD with 205k miles. When I get to 60mph I can feel it start to shake and by 70 mph the whole cab is rattling. I took off the back four tires and had them all rebalanced then replaced the rear shocks, still just the same. It feels like every bet of road vibration is making it into...

If you are in the market for new bullet molds I highly suggest avoiding these idiots. I bought a 510-775 and a 458-645. The 458 is rough around the edges, but works fine. The 510 was useless. The first one they sent me made bullets that were out of round by .012. The bands start at .509 and...

I got a chance to take the new .459 bullets to the range. The finished weight was 710-712 grains loaded with 32, 34 grains h4198 and 42, 44 IMR 3031 seated to 3.020 (max length in BFR cylinder) They did surprisingly well. The velocity of the h4198 loads was in the 1360-1380 FPS range...

Well I got the stuff together and made some bullets. So far the accurate molds 512-720w which is actually about a 660, and the NEI 512-775 gc dd which is about an 820. That one will probably need to returned already. It consistently throws a .520, and sizing it is ugly. I had to use the Lee...

I'm thinking of getting into the business, but I would like to get schooled before I dive in head first. Any information on readings, techniques, supplies, ect would be appreciated. Anybody feel like getting out of the business? This would be mostly for 45 rifle and I take quality over...

Just curious what is the coolest gun you've seen or heard of. My vote goes to the Szecsei and fuchs double barrel bolt action. Available in side by side or over under .17 to .700 caliber, and it can be yours starting at a miserly $70,000, or you can get the rimfire version starting at only...

Any recommendations for a good ar10 trigger? The one ive got now is creepy and prone to bump fires.

Im looking for some lad bullets for the 45/70 that seat out further that the standard 2.550 similar to the lyman 457124, http://www.midwayusa.com/product/632793/lyman-1-cavity-bullet-mold-457124-45-caliber-458-459-diameter-385-grain-round-nose I don't want to get into the lead casting...

What are your thoughts on this thing. http://www.rifleshootermag.com/2012/10/15/love-child-zel-custom-t1-tactilite-review/

So its a plant its green and it grows in dirt. Besides that it stands just over three feet tall with green flowers. It is by nobody's definition an exotic plant. I was planning to let it go just to see how tall it would get, but it got run over by pumpkins.

truck is a 95 3500 dually. It has the secondary set of leave springs that can be hooked up for really heavy loads. Im looking for the U-bolts or the brackets to hook up the extra spring set and some instructions as to the correct way to do it. Thanks in advance

I have recently been giving myself several headaches researching turbos and trying to pick one out, so I decided to ask the experts. Sadly though I couldn't find any experts so im posting it here.:-laf:-laf:-laf Im looking for something that is a good daily driver. Fast and low spooling that...