Search Results for Query: *

The fitting where the hot line coming out of the Trans cconnects to the small Trans cooler on the side of the block has cracked. Can I bypass this small cooler temporarily? It's not the threaded joint, it's the welded joint on the cooler. Any help or suggestions would be greatly appreciated

My coolant keeps leaking out of the front of the engine. It's a pretty slow leak, just a steady drip. Would this be my water pump?

I've got a slight shudder upon takeoff. Nothing when sitting still. Nothing once above 5 or 10 MPH. Any ideas?

Was running my Smarty tnt on sw2 with timing on 3. I was getting a lot of what I believe was timing rattle. Set the timing to 2 and the rattle went away but it takes a lot more pedal to get the same amount of power and acceleration now and it's even more noticeable when towing. Any suggestions...

I have a 40' dual tandem straight deck that I'd like to convert to a hydraulic . Has anyone ever done this? From looking at the ones I've seen it seems like it would be fairly simple. Any advice or insight would be appreciated.

I'm sure I'm opening up a big can of worms by bringing up HIDs in our trucks and I'm aware of all the issues associates with hids but I've had them for almost a year now and I've been through most of the problems. But the light output is awesome. I don't feel like I can only see 50' in front of...

Today I was taking off from a stop and all of the suddenly. Lost all forward power. Tried manual low, nothing. Reverse, nothing. Upon trying to put it In park it made a "card in a bicycle spoke" type noise. Then once it got into park it wouldn't hold park. Fluid level is fine. Also, tried it in...

Right brake /signal wire remains hot on trailer plug all the time. The right signal nor brake lights on the truck are lit. Doesn't matter if truck is running or not. I've got a modulite but it's been installed for 6 months and this problem just started a week ago. Any ideas?

Truck showing dtc p2503 charging system output low. Voltmeter is lower than normal, just above low end of the red on the dummygauge. Any help or advice on what to check?

I have a spot where the front steering linkage has started hitting the front diff cover. any idea what would cause this or how to fix it?

My raptor lift pump is dying and the warranty replacement won't be here till Friday. Truck runs fine as long as it's not wot. Can I limp along like this till the new one gets here or will it do some sort of harm by only running 1psi fuel pressure?

My ABS light and e-brKe light on the dash both came on for no apparent reason. Everything seems to function normally tho. Any ideas?

I've got a horseback hitch in my truck, most of the trailers I pull are goosenecks. I'm considering buying a 5th wheel camper, I've never owned a 5th wheel . Can anyone tell me what the best way to accommodate both setups is?

When I shift into 4 hi, truck feels like something is banging to beat hell under the drivers side floorboard, this occurs in forward and reverse. It feels like something is trying to engage but slipping out maybe. This only happens about every 3 seconds as you take off from a stop, and it's...

last night i was making a u-turn when all of the sudden i noticed that i was freewheeling, even though i hadn't taken my foot off the gas. My engine is running just fine. but when i go to put the truck into gear i don't feel it engage, the is true for reverse, drive, and both manual lows, The...

i'm trying to replace the pulley on my alternator with the kilby combo pulley. When i put the new pulley on, do i just use a regular hex nut on the spindle because it appears to me that the guts of the OEM pulley which originally hold it on are built into the pulley. thanks in advance for any help.

does anyone have any measurements, drawings, schematics, or even just good pics of the brackets needed for mounting a york compressor to a 3rd gen. i'm aware that kilby makes a kit for $480 but i'm not real hip to the idea of paying that especially being as how i bout the combo pully from them...

I remember a while back some people were wondering how to do this. I finally ran across this again, a couple years ago I printed it off, took it and the truck to dealer, tech had never heard of it but said he'd try. It works. Star scan Main Menu > ECU view > FCM/CGW > Misc. Functions >...

My sig truck runs most of the time with the edge ez on 2 and Smarty tnt on sw 8. Timing 2 , wg off, tq 3, timing 2, rp 2. I modified my air box with apiece of 4 inch flex that runs Don behind the front bumper for increased air intake and I run the 4" pleat wix filter. : im aware of the fact that...

just installed transmission temperature gauge a few weeks ago. the first time i towed since the gauge install i noticed that my trans temps climbed from 180 (which seems to be where it runs at on a normal basis). but i was towing an 18 foot enclosed aluminum bumper pull with 4000 pounds in the...