Search Results for Query: *

This has been covered here and there in the past but was hoping for some updated info. I'm looking to heat the shop with a wood stove. I can get as much wood as I want, my costs would be to procure an old stove and clean it up, then install. Is this an efficient way to go? In my neck of the...

So after lots of searching, I may be more confused than when I began. In my 06 auto, I have no brake lights but have turn signals, running lights etc. The cruise will work sometimes, but only when holding the brake pedal up with my foot. Then it sometimes lasts for hours or sometimes immediately...

Had a new clutch and hydro (G56-OKHD) installed in my Dad's truck (2006/G56) on Friday. Everything seems to be performing flawlessly with the exception of the clutch pedal, it's very stiff. I expected it to be as soft as it was beforehand, this is about 5 times stiffer. When I did the same...

So I want to put a big loop lever on my Marlins. There seems to be a few off the shelf models along with a few folks that do custom levers. Who has done this and what advice do you have for me? Thanks!!!

Here's another nice one on eBay to check out. http://www.ebay.com/itm/Dodge-Ram-2500-CUSTOM-/321348693635

I'm going to be selling my truck this summer and need a stock radio to put back in it. Doesn't need to work, I just need something to fill the hole. Will pay shipping obviously. Thanks a lot!

So we all talk about our "million mile" Cummins; do we take too few miles into consideration? I'm looking at a 2001 that has just under 60k miles, (about 5k a year). Does that sound too low, like a lot of sitting or short trips? Anything to be concerned with when looking at low mileage trucks or...

Do any of our northern residents carry or know of anyone who carries 10mm instead of . 44 mag et al? (edit) I guess I should have specified bear "defense", not for pursuing bears. My tracker in . 44 has 5 shots, my thinking is 15 would be better odds. If found in the fetal position with said...

1985 W250 Cummins Not sure if anyone else was watching this but sure would be nice!

So i'm looking to purchase an enclosed trailer within the next 6-7 months. I'd like a 7x12 or 7x14 that will be used for hauling household good (moving). Does anyone have any experience with brands, towing quality, things to watch out for? I'd like to buy used but an open to purchasing new.

Saw this one on eBay, if anyone's interested. 93 first gen.

Can anybody recommend a good forum for Class 8's, big trucks:-laf I'm looking to buy a truck in about 3 years and want to start doing research. Any advice for some good reading material? Thanks!

I need some help locating a bolt. My FSM only gives the following dimensions . 375-16x1 . 125. It's for a Jeep, it bolts into the block for a transmission brace deal. These numbers translate to something, however when I go to the bins in the hardware store they're obviously not much help. If...

I love Mopars, I love all things fast. But i'm sort of scratching my head on this; would you ever pay that kind of money for a Hemi Cuda? Even with the history blah blah. The E bodies weren't my favorite so maybe I'm biased? I added it to the watch list nonetheless...

For the last 10 years or so I've wanted to buy an old jukebox and restore it. My grandparents had built a bar onto their house for all there friends to come over and socialize (the liked to party:D). The centerpiece was a little no frills AMI D-80. My mom has a picture of me dancing around it as...

The little metal sleeve like pieces on my injector lines; what are they for? More importantly, can i take them off? Mine are all loose, rubbing the injector lines, and i'm curious if this will lead to trouble down the road. I can post a picture if need be but I think you know what I mean. Thanks!

I was helping my cousin today with his truck (it's a 96') that's been having some hard start problems. We did the usual fuel filter change, check for leaks, check the solenoid, etc. I noticed while I was crawling around underneath looking for leaks that his fuel tank looks like a crunched up...

My father in law has an 06 with the G56, it has an awful rattle at shutdown which to me sounds like something coming loose? If the flywheel is "separating", is this something you can physically hear? He doesn't notice it but I can definitely hear it, don't want to mention it though and have him...

Going to be selling my 93' at the Jefferson State Nationals this weekend in Redding CA. It's not on Craigslist or anything, just seeing if it will go this weekend. I'm putting it in the show and shine just for the exposure. Let me know if you're interested. This truck has waaaaaaay to much to...

I'll finally be getting out of the Socialist Republic of Commifornia in July!!!Oo. I'm going to be needing a car trailer to pull my Jeep (4k lbs plus some cargo) out to Tenn. I've never owned a car trailer but have borrowed a few from friends in the past. The ones i've looked at all seem to be...