Search Results for Query: *

Hi, Posting for my boss, he's got a 97 12v with a supposed to be built transmission. Guess he was driving and shifted into natural at highway speeds and when he put it back in gear nothing, no forward or reverse. Guess the fluid is still pink and park still holds the truck. Was thinking...

Hi, Anyone know of a supplier who makes a braided brake hose kit for our trucks with no lift? Regards, Jim

Hi, Well long shot but here's my dilemma Got a 1992 w250 that has a 360 tbi/nv4500 and won't start. Replaced all the sensors in the distributor Replaced all the relays on the fender Replaced the fuel pump No power to the fuel pump, so I bypassed the harness and still no spark. Also no...

Hi, Has anyone done this, I found a few writeups but no pictures or what's involved. There was a member with a 69 Ford, but is no longer a member and his post is missing pictures now. Or if you have any contact information for him you could share. Thanks,

Hi, I've got a 2007 st with steel wheels and recently picked up aset or factory forged aluminum rims and the dealer says the lug nuts are the same though the aluminum rims don't have much of a bevel in them so would make me think they should have a shouder on the lug nut can some confirm or...

Have a MADS Smarty model S-03 for 1998.5- 2002 24 valve new price 475 + shipping OBO In MI 48444 Regards

Hi all, I have a 1989 D250 I am in the process of swapping in a NV4500 and, I'm looking for a used stock clutch disc or aftermarket that will work with a stock pressure plate, not looking to get a bunch of miles out of it, I am in the process of getting this truck going for a few months (like...

Beautiful well maintained 1999 Quad-cab 2500 4X4 pickup (2nd-owner truck), with approx 155K miles. Cummins 24V turbo-diesel with upgraded injection pump and injectors........approx 425hp / 700 lb/ft. Heavy duty components throughout...Dana 80HD / Dana 60 / NV 241HD transfer case / NV 4500 HD...

Hi, I have a 1989 2wd with a G360 that took a dump and have a 95 2wd NV4500 I want to install, I have the advance adaptors kit on order but they did not know how to handle the speedo cable to the newer 95 trans as it has a electric connector Does someone make a kit or a mechanical output...

Hi all, Ok just did a head gasket and ARP studs a week ago (dam my arms are still tired) first time out and bang no 5th gear I ordered a repair kit (see below) and the factory updated nut do I need to get a new gear as well as the TSB listed a gear part number or will I be able to reuse my...

Hi all, I had my head gasket let loose yesterday and was looking at getting a upper end gasket kit from Cummins and ARP studs and one question can you still get the head in with the studs mounted in the block or do you need to install the studs after the head as it seems like it might be a...

Hi, The question I have is can you install knuckles outward 2001 onto a 1999 axle or are there other differences besides the brakes and I believe the ball joints are different but since they install in the knuckle I would imagine it shouldn't make a difference Also is the center section of...

Posting this for a friend; "Hey guys, worth a shot to get more eyes watching for a somewhat unique vintage car, especially any of you around Texas. This was a fairly complete matching #s project car that my dad found and I bought years ago, never had time and money at the same time. I had...

Hi all, About a 10 months ago I upgraded my lift pump to a mechanical pump and loved it for the most part until just recently I had a issue where my gage would go to zero at idle and then back up to 16-20 while driving, then Friday it would only get up to 10 and still nothing at idle, at...

Hi, Well my clutch died this morning(great was to start the week) and went and ordered a Dual disc South Bend Clutch kit (SDD3250-5K) and went with their suggestion of upgrading the input shaft and was wondering if there are any tricks or pit falls in installing this to look out for Thanks...

Hi, I've got a 99 with 150,000 on it has 175hp injectors and a Hot Rod VP pump and a Glacier Diesel mechanical lift pump and running a 4" exhaust with a Smarty running at #5 and unsure on how much HP and Torque I am producing, when I bought the truck the guy said 450hp and 700ft/lbs, but not...

Hi, I am going to be swapping out gears(3. 54 to 4. 10) in my 99 and got a complete 01 Dana 60 with 4. 10's from a gas truck, is there any other benefits to installing this axle into my truck besides the removable rotors and larger pads? I had thought I had read somewhere that the axle...

Hi, May need to buy a new fuel PSI gage, currently have a Westech 0-30 psi that does not seem to work, did a quick check with an automotive oil PSI gage and not even close, anyhow should I go with another Westech or AutoMeter? Is the AutoMeter worth the extra cost? (my other gages are all...

Hi, I am in need of a new lift pump and considering a mechanical one (FuelBoss, MITUSA, DDT) anyone have any experence with these? http://www.glacierdieselpower.com/product.aspx?pf_id=FB-98502 it seems like a good idea vs the normal electrical route. Regards,

Hi, I recently got one as a spare from NAPA and my truck does have the relocation kit (moved it to the frame rail below the driver’s seat) and was reading in the last Geno's catalog that it said these units would not work horizontally though that is how the brackets orientate it so are they...