Search Results for Query: *

I have had to replace my pinion seal twice in 77K miles. Anybody else had a problem on a Dana 80 with limited slip?

I was wondering if anyone else is having a problem with the pinion shaft seal. Mine is leaking again at 66K and the original only made it to 8K. I just replaced my airshocks with regular ones and I believe that the extra axle travel has disturbed an othewise good seat. Any comments/ suggestion...

I am looking for information on a transfer pump that stratapore advertised SOMEWHERE that mounts to the intake horn and feeds the OEM Xfer pump. It is supposed to boost fuel pressure by 6 psi. I have looked high and low and cannot find the product. It is actually a fuel/water seperator with a...

Somebody that knows the answer for sure, please tell me what it is that makes the engine defuel. I thought it was hitting 21 PSI of boost but after some go rounds in another post I thought I would see if I was right or wrong. Someone mentioned the VP44 could not produce more fueling but I have...

Fellow CTD owners. I put in a boost fooler some time back and have not had any problems until the other day. This made me wonder how the fooler was working. I set the overboost code 0234 when my boost hit 31 PSI. Do all boost foolers simply move the trip value by 10 PSI. Stock trip is supposed...

has anyone mounted cb ant on the front fenders ( a bracket that goes under the hood). Where did you get the parts to do it. Would you recommend firesticks? R, Andy

Can somebody lead me to an solution? The rear of my 2500 is to high for my 5th. My 5th wheel is only 19 feet plus overhang. Anyway, the truck bed angles up and my trailer angles down causing the two to make contact. I get about 4. 5 inches of clearance on flat and level ground measuring at my...

Can someone please tell me how identify which rear end model I have. My tech manual shows 4 rearends. I have the tech manuals that you can order from the back of the owner's manual. Starting with a 9 1/4 inch and moving to something like 486 RBI. I have read all the exterior tags and all...

I am getting frustrated over air bubbles getting in my fuel gauge line. I am reading my pressure at the inlet to the VE44 from the filter house. I have Geno's banjo installed also. I am not sure if bubbles are getting in there from the VE44 pump or the Xfer pump ( I suspect cavitation is the...

I have just ordered stage 3 injectors (100 hp). I don't have a boost module. Has anyone used these and was there alot of smoke without the boost fooler?

I was about to buy a EZ box but then started thinking, maybe injectors would be the best buy for the buck. I am stock with the exception of gauges (boost,egt, fuel). With a standard box I see that I can get about 60 hp. What do you get with a better set of injectors. I don't plan on going on a...

Problem: In the morning I get 15 PSI @ idle. Drive a bit and it drops to 7 PSI. Put a load on it and I get 4 PSI. I can stop and let it cool say an hour and I get 15 PSI again. I have just replaced my fuel filter for troubleshooting purposes after about 5k miles of use. It looked fine. I know...

I read that I could turn my key 3 times and the dianostic faults would show up if any. Well I got PCU 1653 and ECU 0522. Does anyone have a method to find out what these are? My truck has been running a little flat lately. I thought is was just the weather... maybe not. :o

Dodge gets the opportunity to have my truck for a day. My pinion seal is leaking. I heard that Dana/Spicer did some production mods but only modified the pinion seal instead of making a new one. The modified ones are supposed to leak. It leaked before but I was stupid and cleaned up the mess...

Can anyone set me straight? I have found that the Diablo Sport puck offers the same HP vs torque as the EZ but cost about 100 dollars less. Does anyone have any ideas whether this is a good elect. package. I did like the fact that I could use my home computer to taylor the modules performance...

I have just ordered a fuel pressure gauge from Geno's Garage. I was wondering if someone could tell me if I should also order a Banjo fitting. I am assumming that I can remove the one on my injection pump and install a new one that can take an 1/8th inch fitting for the pump pick-up. Once again...

Just had my stock 2001 on the Dyno. I was surprised at the results. I had been led to believe that I should get about 193 HP and 320-350 ft lbs of torque. I was pleasantly surprised to get 217 HP and 434. 89 ft lbs where the wheel hits the pavement. I haven't heard of anyone else posting like...