Search Results for Query: *

The upper right corner of door (when looking at a closed door from outside the truck) is hitting the door frame. I noticed the bushings were shot so I just replaced the door pins and bushings. This has now allowed the door to miss the frame by a hair but still not "aligned" correctly. I checked...

So it appears that finding a new OEM grille is going to be almost impossible. Based on that I started looking at vendors that make custom grilles - they have to be able to make a repro that looks like the original - right? has anyone tried this? Any info would be appreciated. Thanks Mike

so i found the battery not charging, alternator is less than a year old so starting reading posts. I was told to verify A/C and Cruise and YEP they don't work either. Sounds like could be a number of things, but most likely the ECM. Any thoughts on last checks before i send mine in to be...

OK things are getting clearer as i work thru the issues. I previously posted about lights doing some crazy stuff. i fixed abs and brake lights, BUT i still have one more to go..... Sometimes when i turn on the headlights, via the original head light switch, the lights come on, BUT the dash...

OK so here is what is happening: 2 of the 4 lights in the "square cluster" are ON Brake and anti lock - on permanently water in fuel and wait to start - act normal Every now and then when the headlights are turned ON: all analog gauges peg high or low both green turn...

On my drivers side rear wheel, inside the drum where the parking brake cable attaches to the bracket, the little clip failed twice. I know someone has come up with a better way, but I can't find it in my searches - any hints?

The transition seems to shift smoothly and goes into drive very quietly. But when I put into reverse I get a pretty loud clunk. Seems to work fine but doesn't sound good. Any thoughts? Mike

The needle broke off my PRNDL indicator. Cable and slide works great but needle now missing. Anyone have a repair for this - just glue pointer on slide? I would really like the whole assembly if anyone has one but i have not located one yet. Any help there would be great as well. thanks Mike

I have a question. I am working with my daughter on our 1992 W350 truck and it is coming along nicely. She just turned 16 and has been helping me "restore" this truck so that she is able to drive it when it is done. She just got her permit and is now off and driving our other vehicles. I had her...

Ok so I have done some trouble shooting but could use some help. I removed all non factory wiring (,trailer plugs etc). Traced all wires under truck and found no shorts Removed the bulbs Then i disconnected the blue connector under the dash which I was told separated the fuses and...

Read a lot about the gears going bad and causing the odometer to not work. Found the replacement gears but got to thinking. Is it the gears in the speedo if they both dont work? Or is it some sensor or something? They both stopped working at the same time. Thanks Mike