Search Results for Query: *

Hello all, I've been out of touch with everything 4th Gen Ram as mine was down with a bad dual-disk clutch. I've since gotten the repairs paid for and and once again, bring my 2014 Ram back to life. A lot still has to be done. Among the tasks is the DEF delete I'd like to perform on it. I know...

I'm under a load of 4 cars delivering in Buffalo, NY and Cincinnati with my route taking me towards GA and the FL panhandle. From there, I am headed back to Maine but I just lost 6th gear. Anyone know who may have a G56 for a '14? Just asking.

I've received my oil sample analysis from ALS Tribiology, a service I've been using for the entire life of my truck, with result that includes abnormally high levels of aluminum and potassium in my oil at 11 ppm during my previous oil sample to 25 ppm and 22 ppm to 51 ppm respectively. At the...

Hello again all, Has anyone attempted the exhaust manifold gasket replacement on our 6.7s? I heard that they have weak manifold-to-head bolts and that there is a fix by upgrading those bolts. I also heard it us a bear of a job to do and one shop told me it is at least 15 hours labor that could...

Hello once again with another development. I'll be idling for a while when the regen system will come on, I discovered that when I touch the brake pedal, the regen shuts off and, when I let off the brake pedal, the regen resumes. Where can be the correlation?

Has anyone experimented with adding leaves in place of the spacer on the '14 3500?

Hello again all, In bracing myself for possibly replacing the turbo in the Ram 3500, I've come across the one at the following link: https://www.autoanything.com/superchargers-turbochargers-intercoolers/61A7021A0A0.aspx Can anyone tell me anything about the quality and dependability of this...

2014 Dodge Ram 3500 6.7L DRW G56 manual speed transmission I have low turbo pressure. I am running from 3 to 5 psi at 1800 rpm. My max boost is 8 psi at 2500 rpm. I installed new fuel filters. I pulled the air filter out. I even partially disconnected the DPF filter thinking it was clogged...

mjatczynTJJEEPERDJones (86)DHeule (66)AYSCII (57)kelly4463 (51)Paddy McMahon (51)DTosh (51)therabbittree (41)rajawisata (33)

Hello all, I am looking at Geno's Garage and they are 2 listed. Which would you prefer. I'm going to add a poll. This one? Or... This one? Or Another not listed.

And then, we have the transmission "issue". Popping out of gear while coasting downhill in 6th particularly with the engine brake on. This only happens when I am coasting down a hill and only in 6th gear. I can coast down in 5th and never have this. I also accelerate easy or hard in all gears...

Hello all, According to Phoenix Friction, switching to a solid poses no additional wear. This info is at: http://www.phoenixfriction.com/t-dodge-ram-cummins-turbo-diesel-g56-transmission-clutch-kit-options.aspx it goes into a bit nmore detail at...

Hello all, I'm hauling this load up to new York and then on to Maine. It's time for a clutch replacement. The throwout bearing is screaming at me and since I'm going to do it, may as well replace the clutch. So, may i ask you all your suggestions for the replacement parts? This is Ram 3500...

...for the drain and fill plugs? Anyone know? By the way, has anyone here installed any of the manual transmission coolers offered by Geno's that utilize the PTO openings? If so, how do you like it/them? When using those, is there a provision to install and temperature gauge probe or is there...

Hello all, I'm headed out with a load of cars to Idaho but thought I'd share this with you: Below is an image of the reverse light switch which, over time, has failed due to wear. A second image is of a new one. I'm at 165,000+ miles and I guess I do a lot of shifting into reverse shown by...

Hey all! While I am still at home, let me attach some images of my last oil sample. I'm doing another oil change later today (if I ever get off this computer) and would like to compare who I use with those of you who use other labs just to see if I have selected a good company. I get my kits...

Hello all, Because of the likes of Radio Flyer" on TDR, as well as Bob4x4 and Sag2 with more inside info and, AH64ID and Rvtruckn as well as others, I've subscribed! Really!! Thank you so much, folks I've mentioned and to those of you whom I've neglected to mention. As I participate more, I...

Okay, so, I know better but did it anyway. I'd decided to run across Death valley with this load of cars. So after pulling some of these steeper grades grossing 34,000 lbs (at least), I dropped into a low as first gear and topping out at these hills at 5 MPH, saw coolant temps reaching 237...

Can anyone tell me what they think may be the problem as I think I am into new territory here. I am losing power on a regular basis as I hold the fuel pedal to the floor. Let me explain (again) I am grossing 34,000 lbs pulling a slight grade into a headwind at 65 - 75 MPH when my engine power...

Has anyone ever attempted to "wash out" their DPF filter? I'm in a jam and need to do something other than spending $2000.00+ on a new unit. I have a 2014 Ram 3500 6-speed with 148,000 miles, 2111 idle hours and 3139 drive hours on it. I haul cars with a 4-car trailer and usually gross 28,000 -...