Search Results for Query: *

I'm in the process of replacing the front springs on my 1997 dodge 2500 4x4, with the dana 60. I'm not sure if the old spring are stock or a leveling spring. Is their a stander measurement for the stock height. If so where do you measure it? Thanks Dave

I know this subject has been discussed to death BUT, I'm stuck and don't know where to go or look for HELP!!!!! my 97 dodge emergency lights don't work but everything else does, brake, turn ,wipers, high beam etc, on the turn signal lever. What I have done, replaced the turn signal...

I received a new fusible links for the grid heaters relays to the battery. My question is the new ones are reversed from the old ones. What I mean is the larger wires are on top and connect to the battery and the smaller wires connects to the relays. Will this still work the same as the old...

I'm ready to replace my battery cable, and was curios what kit you guys have used? I know its cheaper to make them, just don't have the time wright now. I'm looking at Genoe's Battery Cables and Components - HEAVY DUTY BATTERY CABLE KIT ('94-'98) (genosgarage.com) , C auto electrical supply Gen...

Got some new shoes for the old girl. I went with Pro Comp 69 series vintage matt black rims 16X8 and Goodyear Wrangle Duratrac LT285/75 R16P E1 BSW. I wanted to try the black finish to see if it holds up better than the polish aluminum rims. Trucks been running great, all she needs is a fresh...

I ended up buying a isspro fuel pressure gauge from Geno's, and their Vulcan fuel hose kit and a restriction R7800 isspro, and a Tork Tek snubber and a Lasco needle valve 17-1901. The needle valve is their if I need to shut off the fuel, but between the tork tek snubber .008 and the isspro...

I'm looking at fuel pressure gauges, and was wondering if anyone has used glowshift fuel pressure gauge? or what do you guys recommend. I'm interested in the electric gauges ,not mechanical.

I've search the net and YouTube, but can't find a good write up on how to change the rubber fuel lines on a 1997 Dodge Cummins. I have the Larry'sB fuel line kit that replaces the two lines in the engine bay. Tried the search on here and have found a good write up, so I'm wondering if anybody...

I bought Larry'sB fuel line kit FH-10 which is the two lines in the engine compartment. My question is the clamps they have in the kit says its 3/8 to 7/8, but when you tighten them down ,they don't clamp tight enough on the 3/8 hose and are not even close to work on the 5/16 hose. Has any body...

I need to replace Driver side front wheel hub and bearing assembly on my 1997 dodge cummins 4x4, with a 8800 GVW , and a 4 bolt flange on the bearing assembly. I've all ways used Timken bearings, but if theirs some thing better, will look at. Any one use Detroit axle, MOOG,TRQ,DORMAN,SKF, OR...

I need to replace my upper radiator hose clamp, and i have these Breeze Constant Torque clamps, that are 9/16 inch in width.Is the 9/16 width OK or should I get one that is 5/8 inch in width ?

The breather hose for the engine,on my 97 dodge I'm thinking is 3/4 inch? I would like to replace it with another clear hose. Where can I get one?

I have a 97 with a 47RE automatic,ever since I got the truck from my mom, which sat for a wail before I got it.It has been making a shudder/in and out of over driver or torque lock up,when the torque converter starts to lock up and I give it more power it shudders /in and out of OD or torque...

I bought two interstate batteries for the 97 dodge today. Cleaned up the connections, and had to fix two of the smaller wires, they look like they are fusible links, put new ends on them (crimped and then soldered) then.I wanted to know what they actuality operate or power.I'm assuming the...

Has anyone used the DNR customs 1st/2nd Generation Dodge TPS Delete Kit *91.5-98 12v?https://www.dnrcustoms.com/store/p46/1st%2F2nd_Generation_Dodge_TPS_Delete_Kit_%2A91.5-98_12v%2A.html

I'm looking to replace from the cat back. I've been looking on line and seem to only find full exhaust kits.Does anyone sell a kit,from the cat back? Thanks Dave

Well ,I took the 97 in for a emission test and failed. limit 30% opacity tested at 43%.went back the next day and failed again ,but it was 34.1%.What a ****ty ass test ,have never failed it. I guess I need to get a waiver to get my tabs, but can't find a certified AES SPECISLIST IN MY AREA...

My P7100 pump low idle adjustment screw, top is getting a slit in it ,and when trying to adjust the idle, it makes it hard to adjust. Can I buy a new one?

On my 97 , I have what seems to be a catalytic converter or is it a resonator? The reason I'm asking is I'm looking at exhaust kits and didn't no if I needed this item.

This year I have notice that the 47RE trans ,seems to go in and out of lock up, to the point if I do not let up, it shacks the truck pretty hard.My Dad put the banks system on the truck , but never addressed the transmission.Since I got the truck ,I can not get to hard on it ,or the trans...