Search Results for Query: *

Do any of you know the measurement in width of the locking collar on the ve power screw?

HI guys, do any of you have any idea if a standard gear reduced starter of a dodger pickup with 5.9 work on my tool truck which had acdelco 28mt? Thanx

Hey guys, just to let you know. Dove head first into my ve injection pump. First thing I noticed pump full of metal. After I got it all apart, I saw lots and lots of wear. Some rust on the inside pump itself and the fact that it has been rubbing and noisy. I got half way done and after...

Guys after installing fuel, pin and gov spring 366, truck is only wanting to idle adjust with fuel screw? I dont understand? Makes alot of noise also. To me sounds like something is jumping around, like either the front gear case, or bottom of pump? Dammit! Runs great otherwise!

Got it running put the star wheel and smoke screw back to stock! Power adjustment ended up at 13 out, runs perfect. earlier I had a total of six runaways. After all this I can tell when it is runnng away and I shut it off. But I had to mess with it. Put star wheel in two, wont start? I shoot a...

Hi guys, so after installing the pod injectors I was so jazzed about how good it is running that I finally ordered a fuelpin and governor spring. Never,ever agian will I do something like this with the pump still in the truck! I Took top off pump, freaking allen bolts suck! Installed the...

Hi guys finally got a brand new set of Delphi POD injectors at a screaming deal 255.00. My idle has changed, like I need to adjust it up, its now to low! So I guell Ill do that unless someone tells me different!? I did adjust the throttle pedal, since for years the angle going down the highway...

Do yall run a muffler? What type or brand do you run?

People, thank you all for your help up to this point! Okay, im going to buy a fuel pin and gov spring for my 30 thousand pound work truck,Tooltruck. Does it really matter which fuel pin I purchase? It,s work truck. I just want a bit more torque and higher rpm,s. Im going to put in some either...

Big Pappa, After all the bad stuff Ive read and heard abou most of these high performance houses and shops likie pensacola injection, Id like a name and phone number of a responsible injection person or shop to either send mine to or buy a set, please! Thank You. You all have been so much help...

Guys now, I have an 11 volt draw/short on my electrical system. after pulling all the fuses unhooking everything, AND ITS ALOT IN A TOOL TRUCK. iT IS MT STARTER OF ALL THINGS PULLINT THE 11 VOLTS? Weird? Ryan Wibndings Big Papa, I rebuilt it myself ! works great except! lol

Would someone please get me the correct part number for the high volume low pressure piston lift pump that fits the first gens. Ive ordered 4988751 it was wrong. I would also like the case number if possible. Or do I omit the first number and add a j? Thank You!

I did something stupid. I doubled the size of the holes in side of return line banjo fitting on my 12 valve ve injection pump. I really need the parts number so I can order a new one. Help please!

ON my 91 non computerized cummins 6b5.9 am I supposed to have a cold start function. Grid Heater? On the side drivers of my engine there is a sensor for air temp. What is the deal? Help? It does blow out white some in the cold when I first start it! Big Pappa!

Turns out, it was for the air temp sensor on my 91 12 valve non intercooler engine. The black wire for the sender is not hooked up to anything? Ground? Big pappa!

I have an electrical plug on the side of my non computer mechanical allison at 545! Wht does it do? is it suposed to be a three wire hookup? One wire is hookerd up to the fuel shut off and something else under injuection pump. Black wire not going to anything? one wire snipped at plug! Big...

Ive read that the front seal, or torque converter seal on an allison 540 to 545 is the same has a turbo 400? Ryan

Guys, I have never seen this before. There is a spacer?collar on the end of the crankshaft bigger than where the rear main seal goes and I dont know how to get it off? Cant find this on cummins fast serve I dont know what to do. ITs all apart in my driveway. IT is not a dodge. It is a 1991...

HI, guys my second post. Ill get some pics on my 1991 fully customzed oshkosh mt18fd tool truck. I just put a piston style hi pressure lift pump on my truck with the Justin spring change from florida. Any idea, how much pressure I should be at? I was at sixty with the other pump, with the...

Hi guys, I have an 1991 oshkosh 18 foot tool truck with first gen cummins. 6bta. My fan hub assembly bearing are bad and cummins does not make a rebild kit for it and dont make the part anylonger. The aftermarket ones look not near tough enough for my applicaton. Ideas? esn 445499226...