Search Results for Query: *

Hi all, Drove the truck all day today (did fine), but tonight when I started it to leave the grocery store, saw no oil pressure on the gauge (briefly worked again for a second at one point) and had check engine and check gages lights come on. The code was p0237, and the turbo wasn't making over...

I'm in the process of overhauling my Dana 80 due to gear whine, a rear end vibration, drivetrain clunk and a cracked ring gear tooth that I noticed when I changed my fluid a few weeks ago. When I got it open, I found the carrier bearing had spun on the carrier stub (housings look good though)...

This may be a stupid question, but can I trigger the FASS relay to pick up by connecting the coil to the hot for the existing lift pump? I know the stock pump has weird cycles, but I can't really think of a reason I shouldn't. Maybe one of you can before I do something stupid! I'm already...

I've got a 2001 3500 that I swapped to the 4th gen steering on, and am currently undoing the HIDEOUS aftermarket hydraulic assist mount the PO added in order to install my stock 4th gen steering damper. The PO cut the mounting bracket off for the stock stabilizer, so I have no point of...

Where in the world does the c/horseshoe washer go? Two came in my parts kit, but none came off the truck, and I can't find any parts diagram or section in the fsm that mentions it. I don't want to just leave it off, but I can't find where it goes for the life of me. Sometimes the adjusters...

I recently competed a LOT of work to my 01 3500. Now, I can't get it to start. I cracked the banjo line and had fuel at the VP44, then cracked injector 3 & 4, fuel going everywhere. Closed everything up and crank...it'll catch but not run. Gauges showing 200 rpm and wait to start light...

Gents, I have a leaky firewall both inside and outside the cab. I'm assuming the leak is from the hydroboost (because I know it's the clear power steering fluid I just put in :)), but when I look up underneath the hydroboost/bracket area, it's dry...hose/lines and all. The brakes work well...

Did my oil cooler gaskets the other day and saw this rusty/sludgy stuff on the walls of #2. What's going on here?

2001 3500 quad cab/4x4/NV4500 I recently put a nice dent in my oil pan via an underhoist stand placed incorrectly. The pan is dented in the sump area, and is about 3/8 of an inch deep at worst when I check with a straight edge; I'll try and grab some pictures later tonight. My concern is that...